MapML¶

Installation¶

1. Visit the website download page, locate your release, and download: geoserver-2.25.x-mapml-plugin.zip

   Warning

   Make sure to match the version of the extension (for example 2.25-SNAPSHOT above) to the version of the GeoServer instance!

2. Extract the contents of the archive into the WEB-INF/lib directory of the GeoServer installation.

3. Restart GeoServer.

Configuration¶

Configuration can be done using the Geoserver administrator GUI. The MapML configuration is accessible in the MapML Settings section under the Publishing tab of the Layer or Layer Group Configuration page for the layer or layer group being configured. Here is the MapML Settings section, with some example values filled in:

There is also a MapML-specific global WMS setting in the MapML Extension section of the WMS Services Settings Page. This setting is used to control the handling of multi-layer requests.

If the Represent multi-layer requests as multiple elements is checked (and the configuration is saved), an individually accessible <map-extent> element will be generated for each requested layer. The default is to represent the layers as a single (hidden) <map-extent>.

Styles¶

Like any WMS layer or layer group available from GeoServer, a comma-separated list of styles may be supplied in the WMS GetMap styles parameter. If no style name is requested, the default style will be used for that layer. For single-layer (or layer group) requests, the set of alternate styles is presented as an option list in the layer preview map’s layer control, with the currently requested style indicated.

Note that in order to ensure that the default layer style is properly available to the preview map’s option list, make sure that the style is moved to the Available Styles list in the Publishing tab of the Layer Configuration page. If the style is set to Default but not explicitly made Available, the style will not be available to MapML. Similarly but a with a slight variation in requirement, for Layer Groups, the ‘default’ layer group style must be copied and given a name matching default-style- plus the layer group name.

Tile Caching¶

In the Tile Caching tab panel of the Edit Layer or Edit Layer Group page, at the bottom of the page you will see the table of GridSets that are assigned to the layer or layer group. The values “WGS84” and “OSMTILE” are equivalent to the EPSG:4326 and EPSG:900913 built in GeoWebCache GridSets. However, for the MapML module to recognize these GridSets, you must select and use the MapML names. For new layers or layer groups, or newly created grid subsets for a layer or layer group, the MapML values are selected by default. For existing layers that you wish to enable the use of cached tile references by the MapML service, you will have to select and add those values you wish to support from the dropdown of available GridSets. The set of recognized values for MapML is “WGS84” (equivalent to EPSG:4326), “OSMTILE” (equivalent to EPSG:900913), “CBMTILE” (Canada Base Map) and “APSTILE” (Alaska Polar Stereographic).

<input name="s" type="hidden" shard="true" list="servers" min="0.0" max="0.0"/>
<datalist id="servers">
    <option value="a"/>
    <option value="b"/>
    <option value="c"/>
</datalist>
<link tref="http://{s}.geoserver.org:8080/geoserver/test/wms?version=1.3.0&amp;service=WMS&amp;request=GetMap&amp;crs=EPSG:3857&amp;layers=cntry00&amp;styles=&amp;bbox={xmin},{ymin},{xmax},{ymax}&amp;format=image/png&amp;transparent=false&amp;width={w}&amp;height={h}" rel="image"/>

MapML Resources¶

MapML resources will be available for any published WMS layers by making a GetMap request with the WMS output format to format=text/mapml. See Web Map Service (WMS) for further WMS details, GetMap for GetMap details, and WMS output formats for output format reference information.

SRS/CRS

Note that the WMS SRS or CRS must be one of the projections supported by MapML:

• MapML:WGS84 (or EPSG:4326)

• MapML:OSMTILE (or EPSG:3857)

• MapML:CBMTILE (or EPSG:3978)

• MapML:APSTILE (or EPSG:5936)

The equivalent EPSG codes are provided for reference, but the MapML names are recommended, as they imply not only a coordinate refefence system, but also a tile grid and a set of zoom levels (Tiled CRS), that the MapML client will use when operating in tiled mode. When using tiles, it’s also recommended to set up tile caching for the same-named gridsets.

If the native SRS of a layer is not a match for the MapML ones, remember to configure the projection policy to “reproject native to declare”. You might have to save and reload the layer configuration in order to re-compute the native bounds correctly.

If the SRS or CRS is not one of the above, the GetMap request will fail with an InvalidParameterValue exception. The main “MapML” link in the preview page generates a HTML client able to consume MapML resources. The link is generated so that it always work, if the CRS configured for the layer is not supported, it will automatically fall back on MapML:WGS84.

MapML Output Format

The output image format for the MapML resource should be specified using the format_options parameter with a key called mapml-wms-format. If provided, the provided mime type must be a valid WMS format specifier. If not provided, it defaults to image/png.

Example:

http://localhost:8080/geoserver/tiger/wms?service=WMS&version=1.1.0&request=GetMap&layers=tiger:giant_polygon&bbox=-180.0,-90.0,180.0,90.0&width=768&height=384&srs=EPSG:4326&styles=&format=text/mapml&format_options=mapml-wms-format:image/jpeg

MapML Visualization¶

With the MapML Extension module installed, the GeoServer Layer Preview page is modified to add a WMS GetMap link to the MapML resources for each layer or layer group. The MapML link in the Layer Preview table is generated by the MapML extension to an HTML Web map page that is created on the fly which refers to the GeoServer resource:

You can add layers to the map as you like, by dragging the URL bar value generated by the the Layer Preview WMS formats dropdown menu selection of “MapML” as shown below, and dropping it onto another layer’s MapML preview:

If all goes well, you should see the layers stacked on the map and in the layer control.

MapML visualization is supported by the Web-Map-Custom-Element project. The MapML viewer is built into the GeoServer layer and layer group preview facility. You can find out more about the Web-Map-Custom-Element at the project website <https://maps4html.org/web-map-doc/>. Here is a simple, self-contained example of an HTML page that uses the <mapml-viewer> and <layer-> elements:

<!DOCTYPE html>
<html lang="en">
  <head>
    <meta charset="utf-8" >
    <title>MapML Test Map</title>
    <meta name="viewport" content="width=device-width, initial-scale=1">
    <script type="module" src="http://localhost:8080/geoserver/mapml/viewer/widget/mapml-viewer.js"></script>
    <style>
      html, body { height: 100%; }
      * { margin: 0; padding: 0; }
      mapml-viewer:defined { max-width: 100%; width: 100%; height: 100%; }
      mapml-viewer:not(:defined) > * { display: none; } layer- { display: none; }
    </style>
  </head>
  <body>
    <mapml-viewer projection="osmtile" zoom="2" lat="61.209125" lon="-90.850837" controls>
      <layer- label="US States" src="http://localhost:8080/geoserver/mapml/topp:states/osmtile?style=population" checked></layer->
    </mapml-viewer>
  </body>
</html>

In the above example, the place-holders topp:states, localhost:8080, osmtile, and population would need to be replaced with the appropriate values, and/or the style parameter could be removed entirely from the URL if not needed. You may also like to “View Source” on the preview page to see what the markup looks like for any layer. This code can be copied and pasted without harm, and you should try it and see what works and what the limitations are. For further information about MapML, and the Maps for HTML Community Group, please visit http://maps4html.org.