Download Estimator Process¶

The Download Estimator Process checks the size of the file to download. This process takes in input the following parameters:

• layername : name of the layer to check

• ROI : ROI object to use for cropping data

• filter : filter for filtering input data

• targetCRS : CRS of the final layer if reprojection is needed

This process will return a boolean which will be true if the downloaded file will not exceed the configured limits.

Download Process¶

The Download Process calls the Download Estimator Process, checks the file size, and, if the file does not exceed the limits, download the file as a zip. The parameters to set are

• layerName : the name of the layer to process/download

• filter : a vector filter for filtering input data(optional)

• outputFormat : the MIME type of the format of the final file

• targetCRS : the CRS of the output file (optional)

• RoiCRS : Region Of Interest CRS (optional)

• ROI : Region Of Interest object to use for cropping data (optional)

• cropToROI : boolean parameter to allow cropping to actual ROI, or its envelope (optional)

• interpolation : interpolation function to use when reprojecting / scaling raster data. Values are NEAREST (default), BILINEAR, BICUBIC2, BICUBIC (optional)

• targetSizeX : size X in pixels of the output (optional, applies for raster input only)

• targetSizeY : size Y in pixels of the output (optional, applies for raster input only)

• selectedBands : a set of the band indices of the original raster that will be used for producing the final result (optional, applies for raster input only)

• writeParameters : a set of writing parameters (optional, applies for raster input only). See Writing parameters below section for more details on writing parameters defintion.

• minimizeReprojections : since 2.17, parameter to control CRS management when dealing with heterogeneous CRS’s coverages, in order to minimize reprojections when granules in ROI match the TargetCRS. See RasterDownload of Heterogeneous CRS ImageMosaic below section for more details on this param.

• bestResolutionOnMatchingCRS : since 2.17, parameter to control CRS and resolution management when dealing with heterogeneous CRS’s coverages. See RasterDownload of Heterogeneous CRS ImageMosaic below section for more details on this param.

• targetVerticalCRS : optional TargetVerticalCRS, to be used to transform elevation data from a VerticalCRS to another one. See Vertical data resampling on download below section for more details on this param

• resolutionsDifferenceTolerance : the parameter allows to specify a tolerance value to control the use of native resolution of the data, when no target size has been specified and granules are reprojected. If

  • the percentage difference between original and reprojected coverages resolutions is below the specified tolerance value,

  • native resolution is the same for all the requested granules,

  • the unit of measure is the same for native and target CRS,

the reprojected coverage will be forced to use native resolutions. For example by specifying a value of 5.0, if the percentage difference between native and reprojected data is below 5%, assuming that also the other two conditions are respected, the native resolutions will be preserved. Default values is 0.

The targetCRS and RoiCRS parameters are using EPSG code terminology, so, valid parameters are literals like EPSG:4326 (if we are referring to a the Geogaphic WGS84 CRS), EPSG:3857 (for WGS84 Web Mercator CRS), etc.

ROI Definition¶

A ROI parameter is a geometry object which can also be defined if three different forms:

• as TEXT, in various geometry textual formats/representations

• as REFERENCE, which is the textual result of an HTTP GET/POST request to a specific url

• as a SUPPROCESS result: the format produced as result of the process execution must be a compatible geometry textual format.

As noted above, in all above forms/cases ROI geometry is defined as text, in specific formats. These can be:

• text/xml; subtype=gml/3.1.1: conforming to gml specs 3.1.1

• text/xml; subtype=gml/2.1.2: conforming to gml specs 2.1.2

• application/wkt: the WKT geometry representation

• application/json: the JSON geometry representation

• application/gml-3.1.1: conforming to gml specs 3.1.1

• application/gml-2.1.2: conforming to gml specs 2.1.2

For example, a polygon used as ROI with the following WKT representation:

POLYGON (( 500116.08576537756 499994.25579707103, 500116.08576537756 500110.1012210889, 500286.2657688021 500110.1012210889, 500286.2657688021 499994.25579707103, 500116.08576537756 499994.25579707103 ))

would be represented in the following forms:

• in application/wkt: POLYGON (( 500116.08576537756 499994.25579707103, 500116.08576537756 500110.1012210889, 500286.2657688021 500110.1012210889, 500286.2657688021 499994.25579707103, 500116.08576537756 499994.25579707103 ))

• in application/json: {"type":"Polygon","coordinates":[[[500116.0858,499994.2558],[500116.0858,500110.1012],[500286.2658,500110.1012],[500286.2658,499994.2558],[500116.0858,499994.2558]]]}

• in text/xml:500116.08576537756,499994.25579707103 500116.08576537756,500110.1012210889 500286.2657688021,500110.1012210889 500286.2657688021,499994.25579707103 500116.08576537756,499994.25579707103

• in application/xml: the following xml

<?xml version="1.0" encoding="UTF-8"?><gml:Polygon xmlns:gml="http://www.opengis.net/gml" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xlink="http://www.w3.org/1999/xlink">
  <gml:outerBoundaryIs>
    <gml:LinearRing>
      <gml:coordinates>500116.08576537756,499994.25579707103 500116.08576537756,500110.1012210889 500286.2657688021,500110.1012210889 500286.2657688021,499994.25579707103 500116.08576537756,499994.25579707103</gml:coordinates>
    </gml:LinearRing>
  </gml:outerBoundaryIs>
</gml:Polygon>

The general structure of a WPS Download request POST payload consists of two parts: the first (<wps:DataInputs>) contains the input parameters for the process, and the second (<wps:ResponseForm>) contains details about delivering the output. A typical pseudo payload is the following:

<?xml version="1.0" encoding="UTF-8"?><wps:Execute version="1.0.0" service="WPS" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.opengis.net/wps/1.0.0" xmlns:wfs="http://www.opengis.net/wfs" xmlns:wps="http://www.opengis.net/wps/1.0.0" xmlns:ows="http://www.opengis.net/ows/1.1" xmlns:gml="http://www.opengis.net/gml" xmlns:ogc="http://www.opengis.net/ogc" xmlns:wcs="http://www.opengis.net/wcs/1.1.1" xmlns:xlink="http://www.w3.org/1999/xlink" xsi:schemaLocation="http://www.opengis.net/wps/1.0.0 http://schemas.opengis.net/wps/1.0.0/wpsAll.xsd">
 <ows:Identifier>gs:WPS_Process_Name_Here</ows:Identifier>
 <wps:DataInputs>
  <wps:Input>
   <ows:Identifier>First_Param_Name</ows:Identifier>
   <wps:Data>
     (First_Param_Data)
   </wps:Data>
  </wps:Input>
  ...
  ...
 </wps:DataInputs>
 <wps:ResponseForm>
  <wps:RawDataOutput mimeType="application/zip">
   <ows:Identifier>result</ows:Identifier>
  </wps:RawDataOutput>
 </wps:ResponseForm>
</wps:Execute>

Each parameter for the process is defined in its own <wps:Input> xml block. In case of simple type data, such as layerName, outputFormat, targetCRS, etc, input params xml blocks have the following form:

<wps:Input>
 <ows:Identifier>layerName</ows:Identifier>
 <wps:Data>
  <wps:LiteralData>nurc:Img_Sample</wps:LiteralData>
 </wps:Data>
</wps:Input>

Note the <wps:LiteralData> tags wrapping the parameter value. In case of geometry parameters, such as filter, ROI, the parameter’s <wps:Input> block is different:

<wps:Input>
  <ows:Identifier>ROI</ows:Identifier>
  <wps:Data>
    <wps:ComplexData mimeType="application/wkt"><![CDATA[POLYGON (( 500116.08576537756 499994.25579707103, 500116.08576537756 500110.1012210889, 500286.2657688021 500110.1012210889, 500286.2657688021 499994.25579707103, 500116.08576537756 499994.25579707103 ))]]></wps:ComplexData>
  </wps:Data>
</wps:Input>

Note the <wps:ComplexData> tag, the mimeType="application/wkt" parameter, and the ![CDATA[] wrapping of the actual geometry data (in textual representation), according to the selected MIME type.

Note that if the ROI parameter is defined as WKT, you will need to specify a RoiCRS input parameter as well.

In case the ROI is defined using a REFERENCE source, the input block is slightly different:

<wps:Input>
  <ows:Identifier>ROI</ows:Identifier>
  <wps:Reference mimeType="application/wkt" xlink:href="url_to_fetch_data" method="GET"/>
</wps:Input>

Note the <wps:Reference> tag replacing <wps:ComplexData> tag, and the extra xlink:href="url_to_fetch_data" parameter, which defines the url to perform the HTTP GET request. For POST request cases, tech method is switched to POST, and a <wps:Body> tag is used to wrap POST data:

<wps:Reference mimeType="application/wkt" xlink:href="url_to_fetch_data" method="POST">
  <wps:Body><![CDATA[request_body_data]]></wps:Body>
</wps:Reference>

Filter parameter definition¶

A filter parameter is a definition of a vector filter operation:

• as TEXT, in various textual formats/representations

• as REFERENCE, which is the textual result of an HTTP GET/POST request to a specific url

• as a SUBPROCESS result: the format produced as result of the process execution must be a compatible geometry textual format.

Compatible text formats for filter definitions are:

• text/xml; filter/1.0

• text/xml; filter/1.1

• text/xml; cql

For more details on filter formats/languages, one can see Supported filter languages and Filter functions. Filter parameter applies to vector data. If this is the case with input data, a sample <wps:Input> block of a filter intersecting the polygon we used earlier as an example for ROI definition would be:

<wps:Input>
  <ows:Identifier>filter</ows:Identifier>
  <wps:Data>
    <wps:ComplexData mimeType="text/plain; subtype=cql"><![CDATA[<Intersects>
       <PropertyName>GEOMETRY</PropertyName>
         <gml:Polygon>
           <gml:outerBoundaryIs>
             <gml:LinearRing>
                <gml:coordinates>500116.08576537756,499994.25579707103 500116.08576537756,500110.1012210889 500286.2657688021,500110.1012210889 500286.2657688021,499994.25579707103 500116.08576537756,499994.25579707103</gml:coordinates>
              </gml:LinearRing>
           </gml:outerBoundaryIs>
         </gml:Polygon>
     </Intersects>]]></wps:ComplexData>
  </wps:Data>
</wps:Input>

Sample request¶

Output Format and Response mime-types¶

By default, downloading vector data results in a Shapefile, compressed in a zip file along with its SLD file. It’s also possible to download a GeoPackage file using application/geopackage+sqlite3 as the value for the mimeType parameter.

Similarly, for raster data, by default the downloaded raster gets zipped, along with the SLD style associated to the layer. In some cases, this can be unnecessary, especially if the output TIFF already has some type of internal compression or if we simply want to get back the TIFF output file without the ancillary SLD. Let’s consider downloading a RGB TIFF: the default raster.sld style won’t add anything useful to the output. In that case it’s possible to specify image/tiff in the Response’s output mimeType: the output TIFF will be provided as is, without extra steps of compression and file management.

...
<wps:ResponseForm>
  <wps:ResponseDocument storeExecuteResponse="true" status="true">
    <wps:Output asReference="true" mimeType="image/tiff">
      <ows:Identifier>result</ows:Identifier>
    </wps:Output>
  </wps:ResponseDocument>
</wps:ResponseForm>

It is also possible to download the raster data as a GeoPackage, using application/geopackage+sqlite3 as the value for the mimeType parameter.

Writing buffering options¶

By default raster pixels are encoded using a file stream writing through a default 16KB data buffer. Depending on the network and disk setup, you might want to change the size of the buffer to improve performance. This can be done by adding this property to the JAVA_OPTS: -Dorg.geoserver.wps.download.raster.buffer.size=sizeinbytes where sizeinbytes is the actual value to be set, i.e. 1048576 to set a 1MB buffer.

Moreover, when copying back data resources from within the WPS machinery to the final file output location, a default 16KB data buffer is being used. It’s also possible to change the size of such buffer by adding this property to the JAVA_OPTS: -Dorg.geoserver.wps.copy.buffer.size=sizeinbytes where sizeinbytes is the actual value to be set, i.e. 1048576 to set a 1MB buffer.

Writing parameters¶

The writeParameters input element of a process execution allows to specify parameters to be applied by the outputFormat encoder when producing the output file. Writing parameters are listed as multiple <dwn:Parameter key="writingParameterName">value</dwn:Parameter> within a <dwn:Parameters> parent element. See the below xml containing full syntax of a valid example for TIFF output format:

<wps:Input>
  <ows:Identifier>writeParameters</ows:Identifier>
    <wps:Data>
       <wps:ComplexData xmlns:dwn="http://geoserver.org/wps/download">
         <dwn:Parameters>
            <dwn:Parameter key="tilewidth">128</dwn:Parameter>
            <dwn:Parameter key="tileheight">128</dwn:Parameter>
            <dwn:Parameter key="compression">JPEG</dwn:Parameter>
            <dwn:Parameter key="quality">0.75</dwn:Parameter>
         </dwn:Parameters>
       </wps:ComplexData>
    </wps:Data>
</wps:Input>

RasterDownload of Heterogeneous CRS ImageMosaic¶

An ImageMosaic made of granules in different coordinate reference systems (i.e. several DEM files in different UTM zones) is defined as ImageMosaic with Heterogeneous CRS. The ImageMosaic layer will expose a common CRS as the native one (i.e. 4326).

By default, mosaicking granules with different CRSs will result into a reprojection from the original CRS of the granules to that common CRS.

Since 2.17, a new parameter has been defined: minimizeReprojections

It will be used on Raster Download with a defined ROI and a TargetCRS being specified. When set to true, any Granule in the ROI having a nativeCRS matching the TargetCRS will not be affected by reprojection.

Since 2.17, a new parameter has been defined: bestResolutionOnMatchingCRS

It will be used when minimizeReprojections is enabled too, on Raster Download with a defined ROI and a TargetCRS, without target size being specified. When set to true, the download will aim to preserve the native properties of the underlying granules matching the targetCRS, as much as possible.

Back to the example, a RasterDownload specifying UTM32N as TargetCRS and a ROI covering an area containing UTM32N granules will result into getting those UTM32N granules without applying any intermediate reprojection, also providing back best raw resolution available for that CRS. So, if the ImageMosaic is a mix of UTM32N DEMs at 10 km resolution and UTM33N at 100 m resolution, the underlying reading request will use 10 km resolution, being the best resolution available in the targetCRS. When no granules are matching the targetCRS, the best resolution is taken from all the granules.

Make sure to configure the ImageMosaic’s index to contain both crs and resolution attributes, in order to preserve as much as possible the native properties of the granules.

A typical indexer.properties of such ImageMosaic will look like this:

GranuleAcceptors=org.geotools.gce.imagemosaic.acceptors.HeterogeneousCRSAcceptorFactory
GranuleHandler=org.geotools.gce.imagemosaic.granulehandler.ReprojectingGranuleHandlerFactory
HeterogeneousCRS=true
MosaicCRS=EPSG\:XXXX
Schema=*the_geom:Polygon,location:String,crs:String,resX:double,resY:double
ResolutionXAttribute=resX
ResolutionYAttribute=resY
CrsAttribute=crs
PropertyCollectors=CRSExtractorSPI(crs),ResolutionXExtractorSPI(resX),ResolutionYExtractorSPI(resY)

Vertical data resampling on download¶

Coverages containing elevations data (i.e. DTM/DEM/DSM) have pixel values representing elevations/heights referred to a specific VerticalCRS.

The associated VerticalCRS can be specified in the layer configuration, at the very bottom of the page, where a new optional Vertical Coordinate Reference System section shows up.

The following example shows a DSM layer being configured to specify EPSG:5778 as adopted VerticalCRS.

This section will only show up if:

• The wps-download module has been deployed in GeoServer

• The underlying data is single-band and datatype is at least 16 bit. (i.e.: no Byte datatype, no RGB images, …)

<wps:Input>
  <ows:Identifier>targetVerticalCRS</ows:Identifier>
  <wps:Data>
    <wps:LiteralData>EPSG:9274</wps:LiteralData>
  </wps:Data>
</wps:Input>

9274=VERT_CS["EVRF2000 Austria height", \
   VERT_DATUM["European Vertical Reference Frame 2000 Austria", \
     2000, AUTHORITY["EPSG","1261"]], \
   AXIS["gravity-related height (H)",up], \
   UNIT["m",1.0], \
AUTHORITY["EPSG","9274"]]

<source crs code>,<target crs code>=<WKT math transform>

5778,9274=PARAM_MT["Vertical Offset by Grid Interpolation", \
PARAMETER["Vertical offset file", "GV_Hoehengrid_V1.tif"], \
PARAMETER["Interpolation CRS code", 4312]]