Custom CRS Definitions¶

Add a custom CRS¶

This example shows how to add a custom projection in GeoServer.

1. The projection parameters need to be provided as a WKT (well known text) definition. The code sample below is just an example:

   PROJCS["NAD83 / Austin",
     GEOGCS["NAD83",
       DATUM["North_American_Datum_1983",
         SPHEROID["GRS 1980", 6378137.0, 298.257222101],
         TOWGS84[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]],
       PRIMEM["Greenwich", 0.0],
       UNIT["degree", 0.017453292519943295],
       AXIS["Lon", EAST],
       AXIS["Lat", NORTH]],
     PROJECTION["Lambert_Conformal_Conic_2SP"],
     PARAMETER["central_meridian", -100.333333333333],
     PARAMETER["latitude_of_origin", 29.6666666666667],
     PARAMETER["standard_parallel_1", 31.883333333333297],
     PARAMETER["false_easting", 2296583.333333],
     PARAMETER["false_northing", 9842500.0],
     PARAMETER["standard_parallel_2", 30.1166666666667],
     UNIT["m", 1.0],
     AXIS["x", EAST],
     AXIS["y", NORTH],
     AUTHORITY["EPSG","100002"]]
   

   Note

   This code sample has been formatted for readability. The information will need to be provided on a single line instead, or with backslash characters at the end of every line (except the last one).

2. Go into the user_projections directory inside your data directory, and open the epsg.properties file. If this file doesn’t exist, you can create it.

3. Insert the code WKT for the projection at the end of the file (on a single line or with backslash characters):

   100002=PROJCS["NAD83 / Austin", \
     GEOGCS["NAD83", \
       DATUM["North_American_Datum_1983", \
         SPHEROID["GRS 1980", 6378137.0, 298.257222101], \
         TOWGS84[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]], \
       PRIMEM["Greenwich", 0.0], \
       UNIT["degree", 0.017453292519943295], \
       AXIS["Lon", EAST], \
       AXIS["Lat", NORTH]], \
     PROJECTION["Lambert_Conformal_Conic_2SP"], \
     PARAMETER["central_meridian", -100.333333333333], \
     PARAMETER["latitude_of_origin", 29.6666666666667], \
     PARAMETER["standard_parallel_1", 31.883333333333297], \
     PARAMETER["false_easting", 2296583.333333], \
     PARAMETER["false_northing", 9842500.0], \
     PARAMETER["standard_parallel_2", 30.1166666666667], \
     UNIT["m", 1.0], \
     AXIS["x", EAST], \
     AXIS["y", NORTH], \
     AUTHORITY["EPSG","100002"]]
   

1. Save the file.

2. Restart GeoServer.

3. Verify that the CRS has been properly parsed by navigating to the SRS List page in the Web administration interface.

4. If the projection wasn’t listed, examine the logs for any errors.

Override an official EPSG code¶

In some situations it is necessary to override an official EPSG code with a custom definition. A common case is the need to change the TOWGS84 parameters in order to get better reprojection accuracy in specific areas.

The GeoServer referencing subsystem checks the existence of another property file, epsg_overrides.properties, whose format is the same as epsg.properties. Any definition contained in epsg_overrides.properties will override the EPSG code, while definitions stored in epsg.proeprties can only add to the database.

Special care must be taken when overriding the Datum parameters, in particular the TOWGS84 parameters. To make sure the override parameters are actually used the code of the Datum must be removed, otherwise the referencing subsystem will keep on reading the official database in search of the best Datum shift method (grid, 7 or 5 parameters transformation, plain affine transform).

For example, if you need to override the official TOWGS84 parameters of EPSG:23031:

PROJCS["ED50 / UTM zone 31N",
  GEOGCS["ED50",
    DATUM["European Datum 1950",
      SPHEROID["International 1924", 6378388.0, 297.0, AUTHORITY["EPSG","7022"]],
      TOWGS84[-157.89, -17.16, -78.41, 2.118, 2.697, -1.434, -1.1097046576093785],
      AUTHORITY["EPSG","6230"]],
    PRIMEM["Greenwich", 0.0, AUTHORITY["EPSG","8901"]],
    UNIT["degree", 0.017453292519943295],
    AXIS["Geodetic longitude", EAST],
    AXIS["Geodetic latitude", NORTH],
    AUTHORITY["EPSG","4230"]],
 PROJECTION["Transverse_Mercator"],
  PARAMETER["central_meridian", 3.0],
  PARAMETER["latitude_of_origin", 0.0],
  PARAMETER["scale_factor", 0.9996],
  PARAMETER["false_easting", 500000.0],
  PARAMETER["false_northing", 0.0],
  UNIT["m", 1.0],
  AXIS["Easting", EAST],
  AXIS["Northing", NORTH],
  AUTHORITY["EPSG","23031"]]

You should write the following (in a single line, here it’s reported formatted over multiple lines for readability):

23031=
 PROJCS["ED50 / UTM zone 31N",
   GEOGCS["ED50",
     DATUM["European Datum 1950",
       SPHEROID["International 1924", 6378388.0, 297.0, AUTHORITY["EPSG","7022"]],
       TOWGS84[-136.65549, -141.4658, -167.29848, 2.093088, 0.001405, 0.107709, 11.54611],
       AUTHORITY["EPSG","6230"]],
     PRIMEM["Greenwich", 0.0, AUTHORITY["EPSG","8901"]],
     UNIT["degree", 0.017453292519943295],
     AXIS["Geodetic longitude", EAST],
     AXIS["Geodetic latitude", NORTH]],
  PROJECTION["Transverse_Mercator"],
   PARAMETER["central_meridian", 3.0],
   PARAMETER["latitude_of_origin", 0.0],
   PARAMETER["scale_factor", 0.9996],
   PARAMETER["false_easting", 500000.0],
   PARAMETER["false_northing", 0.0],
   UNIT["m", 1.0],
   AXIS["Easting", EAST],
   AXIS["Northing", NORTH],
   AUTHORITY["EPSG","23031"]]

The definition has been changed in two places, the TOWGS84 paramerers, and the Datum code, AUTHORITY["EPSG","4230"], has been removed.