Configuration¶

Security¶

Both Keys and Security are options for accessing protected services. Keys are currently for Google maps premium accounts and Security is for other types and is more general Currently only BasicAuth is supported but other strategies can easily be added

security:
    - !basicAuth
        matcher: !dnsMatch
          host: www.camptocamp.com
          post: 443
        username: xyz
        password: zyx
        preemptive: true
    - !basicAuth
      username: abc
      password: cba

The above example has 2 security configuration. Each option is tested (in order) to see if it can be used for the given URI and if it applies it is used to configure requests for the URI. In the above example the first configuration will be used if the URI matches the hostmatcher provided if not then the second configuration will be applied. The last configuration has no host matcher so it is applied to all URIs.

A basicAuth security configuration consists of 4 options

• matcher - a host matcher for determining which requests need the security to be applied

• username - username for basicauth

• password - password for basicauth

• preemptive - optional, but for cases where the credentials need to be sent without the challenge

Keys¶

Google maps currently requires a private key to be used (we only support users Google maps premium accounts).

The keys section allows a key to be mapped to hosts. The hosts are identified with host matchers that are described in the <configuration.html#host-whitelist-definition> sub-section.

In addition a domain hostmatcher can be used to select a key based on the domain of the local server. This can be useful if the same configuration is used in a test environment and a production environment with differing domains. For example mapfish.org and mapfish.net.

Finally google maps (for example) requires a client id as well that is associated with the private key. There for in the case of google premium services a legal key would be:

keys:
  - !key
    key: yxcvyxvcyxvyx
    id: gme-xxxcs

Thanks to the hosts and domain matcher it is possible to have a key for google maps and (for future proofing) a different key for a different service.

Fonts definition¶

The fonts section is optional. It contains the path of the fonts you want to use. The entries can point to files (TTF, OTF, TTC, AFM, PFM) or directories. Don’t point to directories containing too many files since it will slow down the start time. By default, PDF gives you access to the following fonts (Cp1252 encoding only):

• Courrier (-Bold, -Oblique, -BoldOblique)

• Helvetica (-Bold, -Oblique, -BoldOblique)

• Times (-Roman, -Bold, -Oblique, -BoldOblique)

• Symbol

• ZapfDingbats

Host allow-list definition¶

In this section, you can put as many entries as you want, even for the same type of filter. If at least one matches, the Map server can be used.

This section is not for defining which client can request maps. It is just here to avoid having the print module used as a proxy to access documents from computers behind firewalls.

There are 3 ways to allow-list a host.

- !localMatch
  dummy: true

- !dnsMatch
  host: labs.metacarta.com

  - !ipMatch
    ip: www.camptocamp.org
?   mask: 255.255.255.255

Metadata definition¶

Allow to add some metadata to the generated PDF. They are visible in acroread in the File->Properties menu.

The structure is like that:

    metaData:
?     title: ''
?     author: ''
?     subject: ''
?     keywords: ''
?     creator: ''
?     supportLegacyReader: false

All fields are optional and can use global variables, as defined in the Block definition chapter. Page specific variables are not accessible.

Page definition¶

The structure is like that:

      pageSize: A4
?     landscape: false
?     marginLeft: 40
?     marginRight: 40
?     marginTop: 20
?     marginBottom: 20
?     backgroundPdf: template.pdf
?     condition: null
?     header:
        height: 50
        items:
          - {BLOCK_DEFINITION}
          {...}
      items:
        - {BLOCK_DEFINITION}
        {...}
?     footer:
        height: 50
        items:
          - {BLOCK_DEFINITION}
          {...}

With the condition we can completely hide a page, same behavior than in block.

If backgroundPdf is specified, the first page of the given PDF file will be added as background of every page.

The header and footer sections are optional. If the items that are in the main section are too big, more pages are generated. The header and footer will be drawn on those pages as well.

Here is a short list of supported pageSizes:

The complete list can be found in http://api.itextpdf.com/itext/com/itextpdf/text/PageSize.html. If you want to use a custom page size, you can set pageSize to the width and the height separated by a space.

Block definition¶

The next sub-sections document the possible types of blocks.

In general, text values or URLs can contain values taken from the spec structure coming with the client’s request. A syntax similar to shell is used: ${variableName}. If the current page is a titlePage, only the root values are taken. If it’s a mainPage, the service will first look in the current page section then in the root values. Here is how to use this functionality:

text: 'The value of mapTitle is: ${mapTitle}'

Some virtual variables can be used:

• ${pageNum}: The current page number.

• ${pageTot}: The total number of pages. Can be used only in text blocks.

• ${now}: The current date and time as defined by the machine’s locale.

• ${now FORMAT}: The current date and time as defined by the FORMAT string. The syntax is here: http://java.sun.com/j2se/1.5.0/docs/api/java/text/SimpleDateFormat.html.

• ${configDir}: The absolute path to the directory of the configuration file.

• ${format PRINTF VAR}: Format the value of VAR using the provided PRINTF format (for example: %,d).

All the blocks can have a condition attribute that takes a spec attribute name. If the attribute name exists and is not equal to false or 0, the block is drawn. Otherwise, it is ignored. An exclamation mark may precede the condition to invert it, exclamation mark is part of yaml syntax, than the expression should be in quotes.

Example: show text block only if in the spec the attribute name showText is given, is not equal to false and not equal to 0:

- !text
  text: 'mytext'
  condition: showText

Text block¶

        - !text
?         font: Helvetica
?         fontSize: 12
?         fontEncoding: Cp1252
?         fontColor: black
?         spacingAfter: 0
?         align: left
?         vertAlign: middle
?         backgroundColor: #FFFFFF
          text: 'Blahblah'

Typical fontEncoding values are:

• Cp1250

• Cp1252

• Cp1257

• Identity-H (horizontal UTF-8)

• Identity-V (vertical UTF-8)

• MacRoman

The font must refer to a standard PDF font or a declared font.

Image block¶

        - !image
          maxWidth: 200
          maxHeight: 100
?         spacingAfter: 0
?         align: left
?         vertAlign: middle
          url: http://trac.mapfish.org/trac/mapfish/chrome/site/img/mapfish.png

Supported formats are PNG, GIF, Jpeg, Jpeg2000, BMP, WMF (vector), SVG and TIFF.

The original aspect ratio will be respected. The url can contain ${} variables.

Columns block¶

        - !columns
?         config: {TABLE_CONFIG}
?         widths: [25,25,25,25]
?         backgroundColor: #FFFFFF
?         absoluteX: null
?         absoluteY: null
?         width: {PAGE_WIDTH}
?         spacingAfter: 0
?         nbColumns: -1
          items:
            - {BLOCK_DEFINITION}
            {...}

Can be called !table as well.

By default, the width of the columns will be equal.

Each item will be in its own column.

If the absoluteX, absoluteY and width are given, the columns block will be floating on top of the page at the specified position.

The widths attribute can be used to change the width of the columns (by default, they have the same width). It must contain one integer for each column. The width of a given column is tableWidth*columnWeight/sum(columnWeight).

Every block type is allowed except for map if the column has an absolute position.

Look at <http://trac.mapfish.org/trac/mapfish/wiki/PrintModuleServer#Tableconfiguration to know how to specify the config field.

Map block¶

Allowed only within a mainPage.

        - !map
          width: {WIDTH}
          height: {HEIGHT}
?         name: map
?         spacingAfter: 0
?         align: left
?         vertAlign: middle
?         absoluteX: null
?         absoluteY: null
?         overviewMap: null
?         backgroundColor: #FFFFFF

width and height are mandatory. You can use variable substitution in this part, but if you do so, the browser won’t receive the map size when it calls info.json. You’ll have to override mapfish.widgets.print.Base.configReceived and set the map width and height of your layouts.

If the absoluteX and absoluteY are given, the map block will be floating on top of the page at the specified position.

The name is what will be displayed in the Acrobat’s reader layer panel. The map layers will be displayed bellow it.

If overviewMap is specified, the map will be an overview of the extent augmented by the given factor. There are few cases to consider with map overviews:

1. If there is no overview overrides and no OL.Control.MapOverview, then all the layers will figure in the PDF map overview.

2. If there are overview overrides, the OL map overview control is ignored.

3. If there are no overview overrides and there is an OL.Control.MapOverview (takes the first one), then the layers defined in the control are taken into account. By default it is the current base layer.

Scalebar block¶

Display a scalebar.

Allowed only within a mainPage.

        - !scalebar
          maxSize: 150
?         type: line
?         intervals: 3
?         subIntervals: false
?         units: m
?         barSize: 5
?         lineWidth: 1
?         barDirection: up
?         textDirection: up
?         labelDistance: 3
?         font: Helvetica
?         fontSize: 12
?         fontColor: black
?         color: #000000
?         barBgColor: null
?         spacingAfter: 0
?         align: left
?         vertAlign: middle
?         backgroundColor: #FFFFFF
?         lockUnits: true

The scalebar, will adapt its width up to maxSize (includes the labels) in order to have a multiple of 1, 2 or 5 values at each graduation. For example:

• 0, 1, 2, …

• 0, 2, 4, …

• 0, 5, 10, …

• 0, 10, 20, …

The barSize is the thickness of the bar or the height of the tick marks on the line. The lineWith is for the thickness of the lines (or bar border).

Units can be any of:

• m (mm, cm, m or km)

• ft (in, ft, yd, mi)

• degrees (min, sec, °)

If the value is too big or too small, the module will switch to one of the unit in parenthesis (the same unit is used for every intervals). If this behaviour is not desired, the lockUnits parameter will force the declared unit (or map unit if no unit is declared) to be used for the scalebar.

The number of intervals can be set to anything >=2. Labels are drawn only at main intervals. If there is no space to display a label at a certain interval, this label won’t be displayed. If subIntervals are enabled, their number will depend on the length of an interval.

The type can be:

• line: A simple line with graduations

• bar: A thick bar with a suite of color and barBgColor blocks.

• bar_sub: Like bar, but with little lines for labels.

The bar and/or text orientation can be set to up, down, left or right.

The align attribute is for placing the whole scalebar within the surrounding column or page. The vertAlign attribute is used only when placed in a column.

Labels are always centered on the graduation, at a distance specified by labelDistance.

Attributes block¶

Allows to display a table of the displayed feature’s attributes.

Allowed only within a mainPage.

        - !attributes
          source: results
?         tableConfig: {TABLE_CONFIG}
          columnDefs:
            {COLUMN_NAME}:
?             columnWeight: 0        MF_V1.2
              header: {BLOCK_DEFINITION}
              cell: {BLOCK_DEFINITION}
            {...}

Look here for how to specify the tableConfig field.

The columnWeigth (MF_V1.2 only) allows to define a weight for the column width. If you specify it for one column, you have to specify it for all of them. The width of a given column is tableWidth*columnWeight/sum(columnWeight).

The source value defines the name of the entry in the root of the client’s spec. For example, it would look like that:

{
  ...
  pages: [
    {
      ...
      results: {
        data: [
          {id:1, name: 'blah', icon: 'icon_pan'},
          ...
        ],
        columns: ['id', 'name', 'icon']
      }
    }
  ]
  ...
}

With this spec you would have to define 3 columnDefs with the names id, name and icon. Each cell definition blocks have access to all the values of the current row.

The spec part is filled automatically by the 2 MapFish widgets when their grids parameter is set.

Here is a crazy example of columnDef that will show the name of the icon and it’s bitmap side-by-side inside a single column:

columnDefs:
  icon:
    header: !text
      text: Symbol
      backgroundColor: #A0A0A0
    cell: !columns
      items:
        - !text
          text: '${icon}'
        - !image
          align: center
          maxWidth: 15
          maxHeight: 15
          url: 'http://www.mapfish.org/svn/mapfish/trunk/MapFish/client/mfbase/mapfish/img/${icon}.png'

A more complex example can be found in SVN: config.yaml spec.json

The print widgets are able to fill the spec for you based on a dictionary of Ext.grid.GridPanel. Just pass them through the grids parameter.

Legends block¶

Display each layers along with its classes (icons and labels).

        - !legends
?         backgroundColor: #FFFFFF
?         borders: false
?         horizontalAlignment: center
?         maxWidth: 0
?         maxHeight: 0
?         iconMaxWidth: 0
?         iconMaxHeight: 8
?         iconPadding: 8 7 6 5
?         textMaxWidth: 8
?         textMaxHeight: 8
?         textPadding: 8 7 6 5
?         defaultScale: 1.0
?         inline: true
?         classIndentation: 20
?         layerSpaceBefore: 5
?         layerSpace: 5
?         classSpace: 2
?         layerFont: Helvetica
?         layerFontSize: 10
?         classFont: Helvetica
?         classFontSize: 8
?         fontEncoding: Cp1252
?         columnMargin: 3

borders is mainly for debugging purpouses and shows all borders in the legend tables. This can be either ‘true’ or ‘false’.

horizontalAlignment can be left, right or center (default) and aligns all items left, right or in the center.

iconMaxWidth, iconMaxHeight, defaultScale with value of 0 indicate that the value will be ignored, i.e. the values are automatically set to the equivalent of Infinity, Infinity and 1 respectively. If the legends URL passed to MapFish (see http://mapfish.org/doc/print/protocol.html#print-pdf) are obtained from a WMS GetLegendGraphic request, the width/height are only indicative (even more when a label text is included with LEGEND_OPTIONS/forceLabels parameter) and it would be safer, in order to preserve scale coherence between legends and map, to set iconMaxWidth and iconMaxHeight to zero.

textMaxWidth/Height and iconMaxWidth/Height define how wide/high the text/icon cells of a legend item can be. At this point textMaxHeight is ignored.

textPadding and iconPadding can be used like standard CSS padding. In the above example 8 is the padding top, 7 padding right, 6 padding bottom and 5 padding left.

if inline is true icons and text are rendered on the same line, BUT multicolumn is still enabled.

if maxWidth is set the whole legend gets a maximum width, just like other blocks. Note that maxWidth does not have any impact on icons size, thus icons may overflow outside the legends block.

if maxHeight is set the whole legend gets a maximum height. This forces more than one column to appear if the legend is higher than the specified value. This can be used to enable the multi-column layout. 0 makes the maxHeight= max value, i.e. the equivalent of infinity.

if defaultScale is non null it means that the legend image will be scaled so it doesn’t take the full space. This can be overridden for individual classes in the spec JSON sent to the print module by adding an attribute called ‘scale’ and giving it a number. In conjunction with iconMaxWidth/Height this can be used to control average and also maximum width/height. If defaultScale equals 1, one pixel is scaled to one point (1/72 inch) in generated PDF. By default, as GeoServer legends are generated with ~90 dpi resolution (exactly 25.4/0.28), setting defaultScale value to 0.7937 (72*0.28/25.4) produces legend icons of same size as corresponding map icons. As the LEGEND_OPTIONS/dpi GeoServer parameter is not handled by MapFish, the resolution will necessary be ~91 dpi, which may cause visual quality difference with the map.

For this to work, you need to set the layerTree config option on MF print widgets, more precisely the legends should be present in the print.pdf JSON request.

layerSpaceBefore is to specify the space before the second and consecutive layers.

layerSpace and classSpace is to specify the line space to add after layers and classes.

columnMaxWidth maximum width of a column in multi-column layout. Not tested (at time of writing).

classIndentation amount of points to indent classes by.

layerSpaceBefore if a layer is after another one, this defines the amount of space to have before it. This will not be applied if the layer is the first item in its column in multi-column layout.

layerFont font of layer name legend items.

layerFontSize font size of layer name.

classFont font of class legend items.

classFontSize font size of class.

fontEncoding (see below)

Table configuration¶

The columns block and the attributes block can take a table configuration object like that:

    config:
?     borderWidth: 0
?     borderWidthLeft: 0
?     borderWidthRight: 0
?     borderWidthTop: 0
?     borderWidthBottom: 0
?     borderColor: black
?     borderColorLeft: black
?     borderColorRight: black
?     borderColorTop: black
?     borderColorBottom: black
?     cells:
?       - {CELL_CONFIGURATION}

A cell configuration looks like that:

?     row: {...}
?     col: {...}
?     borderWidth: 0
?     borderWidthLeft: 0
?     borderWidthRight: 0
?     borderWidthTop: 0
?     borderWidthBottom: 0
?     borderColor: black
?     borderColorLeft: black
?     borderColorRight: black
?     borderColorTop: black
?     borderColorBottom: black
?     padding: 0
?     paddingLeft: 0
?     paddingRight: 0
?     paddingTop: 0
?     paddingBottom: 0
?     backgroundColor: white
?     align: LEFT
?     vertAlign: TOP

The stuff configured at table level is for the table border, not every cell.

The cells list defines overrides for some cells. The cells an override is applied to is defined by the row and col attribute. Those attributes can have several formats:

• 0: apply only to row or column 0 (the first)

• 0-10: applies only the row or columns from 0 to 10

• or you can use any regular expression

Every matching overrides is applied in order and will override the values defined in the previous ones.

For example, if you want to draw an attribute block like that:

You define that:

- !attributes
  tableConfig:
    borderWidth: 1
    cells:
      # match every cell (default cell formatting)
      - borderWidthBottom: 0.5
        borderWidthLeft: 0.5
        padding: 4
        paddingTop: 0
      # match every even cell (yellowish background)
      - row: '\d*[02468]'
        backgroundColor: #FFFFCC
      # for the header
      - row: 0
        borderWidthBottom: 1
        backgroundColor: #FA0002
        align: center
  {...}

Warranty disclaimer and license¶

The authors provide these documents “AS-IS”, without warranty of any kind either expressed or implied.

Document under Creative Common License Attribution-Share Alike 2.5 Generic.

Authors: MapFish developers.