Release Guide¶

Before you start¶

Prerequisites¶

The following are necessary to perform a GeoServer release:

1. Commit access to the GeoServer Git repository

2. Build access to Jenkins

3. Edit access to the GeoServer Blog

4. Administration rights to GeoServer JIRA

5. Release/file management privileges in SourceForge

Versions and revisions¶

When performing a release we don’t require a “code freeze” in which no developers can commit to the repository. Instead we release from a revision that is known to pass all tests, including unit/integration tests as well as CITE tests.

To obtain the GeoServer and Geotools revisions that have passed the CITE test, navigate to the latest Jenkins run of the CITE test and view it’s console output and select to view its full log. For example:

https://build.geoserver.org/job/2.11-cite-wms-1.1/286/consoleText

Perform a search on the log for ‘git revision’ (this is the GeoServer revision) and you should obtain the following:

version = 2.11-SNAPSHOT
git revision = 08f43fa77fdcd0698640d823065b6dfda7f87497
git branch = origin/2.11.x
build date = 18-Dec-2017 19:51
geotools version = 17-SNAPSHOT
geotools revision = a91a88002c7b2958140321fbba4d5ed0fa85b78d
geowebcache version = 1.11-SNAPSHOT
geowebcache revision = 0f1cbe9466e424621fae9fefdab4ac5a7e26bd8b/0f1cb

Since most GeoServer releases require an official GeoTools release, the GeoTools revision is usually not needed.

Release in JIRA¶

1. Navigate to the GeoServer project page in JIRA.

2. Add a new version for the next version to be released after the current release. For example, if you are releasing GeoServer 2.11.5, create version 2.11.6.

3. Click in the Actions column for the version you are releasing and select Release. Enter the release date when prompted. If there are still unsolved issues remaining in this release, you will be prompted to move them to an unreleased version. If so, choose the new version you created in step 2.

If you are cutting the first RC of a series, create the stable branch¶

When creating the first release candidate of a series, there are some extra steps to create the new stable branch and update the version on the main development branch.

• Checkout the the main development branch and make sure it is up to date and that there are no changes in your local workspace:

  git checkout main
  git pull
  git status
  

• Create the new stable branch and push it to GitHub; for example, if the main development branch is 2.11-SNAPSHOT and the remote for the official GeoServer is called geoserver:

  git checkout -b 2.11.x
  git push geoserver 2.11.x
  

• Enable GitHub branch protection for the new stable branch: tick “Protect this branch” (only) and press “Save changes”.

• Checkout the the main development branch branch:

  git checkout main
  

• Update the version in all pom.xml files; for example, if changing the main development branch from 2.17-SNAPSHOT to 2.18-SNAPSHOT.

  Edit build/rename.xml to update GeoServer, GeoTools and GeoWebCache version numbers:

  <property name="current" value="2.17"/>
  <property name="release" value="2.18"/>
  ..
  <replacefilter token="23-SNAPSHOT" value="24-SNAPSHOT"/>
  <replacefilter token="1.17-SNAPSHOT" value="1.18-SNAPSHOT"/>
  

  And then run:

  ant -f build/rename.xml
  

  Note

  use of sed

  To update these files using sed:

  find . -name pom.xml -exec sed -i 's/2.11-SNAPSHOT/2.12-SNAPSHOT/g' {} \;
  

  Note

  sed behaves differently on Linux vs. Mac OS X. If running on OS X, the -i should be followed by '' -e for each of these sed commands.

  Update release artifact paths and labels, for example, if changing the main development branch from 2.11-SNAPSHOT to 2.12-SNAPSHOT:

  sed -i 's/2.11-SNAPSHOT/2.12-SNAPSHOT/g' src/release/bin.xml
  sed -i 's/2.11-SNAPSHOT/2.12-SNAPSHOT/g' src/release/installer/win/GeoServerEXE.nsi
  sed -i 's/2.11-SNAPSHOT/2.12-SNAPSHOT/g' src/release/installer/win/wrapper.conf
  

  Note

  These can be written as a single sed command with multiple files.

  Update GeoTools dependency; for example if changing from 17-SNAPSHOT to 18-SNAPSHOT:

  sed -i 's/17-SNAPSHOT/18-SNAPSHOT/g' src/pom.xml
  

  Update GeoWebCache dependency; for example if changing from 1.11-SNAPSHOT to 1.12-SNAPSHOT:

  sed -i 's/1.11-SNAPSHOT/1.12-SNAPSHOT/g' src/pom.xml
  

  Manually update hardcoded versions in configuration files:

  • doc/en/developer/source/conf.py

  • doc/en/docguide/source/conf.py

  • doc/en/user/source/conf.py

• Add the new version to the documentation index (doc/en/index.html) just after line 105, e.g.:

  <tr>
    <td><strong><a href="http://geoserver.org/release/2.12.x/">2.12.x</a></strong></td>
    <td><a href="2.12.x/en/user/">User Manual</a></td>
    <td><a href="2.12.x/en/developer/">Developer Manual</a></td>
  </tr>
  

• Commit the changes and push to the the main development branch branch on GitHub:

  git commit -am "Updated version to 2.12-SNAPSHOT, updated GeoTools dependency to 18-SNAPSHOT, updated GeoWebCache dependency to 1.12-SNAPSHOT, and related changes"
  git push geoserver main
  

• Create the new RC version in JIRA for issues on the main development branch; for example, if the main development branch is now 2.12-SNAPSHOT, create a Jira version 2.12-RC1 for the first release of the 2.12.x series

• Update the main, nightly and live-docs jobs on build.geoserver.org:

  • disable the maintenance jobs, and remove them from the geoserver view

  • create new jobs, copying from the existing stable jobs, and edit the branch.

  • modify the last line of the live-docs builds, changing stable to maintain for the previous stable branch. The new job you created should publish to stable, and the main development branch will continue to publish to latest.

• Update the cite tests on build.geoserver.org:

  • disable the maintenance jobs, and remove them from the geoserver view

  • create new jobs, copying from the existing main development branch jobs, editing the branch in the build command.

• Announce on the developer mailing list that the new stable branch has been created.

• Switch to the new branch and update the documentation links, replacing docs.geoserver.org/latest with docs.geoserver.org/2.12.x (for example):

  • README.md

  • doc/en/developer/source/conf.py

  • doc/en/user/source/conf.py

Build the Release¶

Run the geoserver-release job in Jenkins. The job takes the following parameters:

BRANCH

The branch to release from, “2.2.x”, “2.1.x”, etc… This must be a stable branch. Releases are not performed from the main development branch.

REV

The Git revision number to release from. eg, “24ae10fe662c….”. If left blank the latest revision (ie HEAD) on the BRANCH being released is used.

VERSION

The version/name of the release to build, “2.1.4”, “2.2”, etc…

GT_VERSION

The GeoTools version to include in the release. This may be specified as a version number such as “8.0” or “2.7.5”. Alternatively the version may be specified as a Git branch/revision pair in the form <branch>@<revision>. For example “main@36ba65jg53…..”. Finally this value may be left blank in which the version currently declared in the geoserver pom will be used (usually a SNAPSHOT). Again, this version must be a version number corresponding to an official GeoTools release.

GWC_VERSION

The GeoWebCache version to include in the release. This may be specified as a version number such as “1.3-RC3”. Alternatively the version may be specified as a Git revision of the form <branch>@<revision> such as “master@1b3243jb…”. Finally this value may be left blank in which the version currently declared in the geoserver pom will be used (usually a SNAPSHOT).Git Again, this version must be a version number corresponding to an official GeoTools release.

GIT_USER

The Git username to use for the release.

GIT_EMAIL

The Git email to use for the release.

This job will checkout the specified branch/revision and build the GeoServer release artifacts against the GeoTools/GeoWebCache versions specified. When successfully complete all release artifacts will be listed under artifacts in the job summary.

Additionally when the job completes it fires off a job for a windows worker. When this job completes it will list the .exe artifacts.

Test the Artifacts¶

Download and try out some of the artifacts from the above location and do a quick smoke test that there are no issues. Engage other developers to help test on the developer list.

Publish the Release¶

Run the geoserver-release-publish in Jenkins. The job takes the following parameters:

VERSION

The version being released. The same value s specified for VERSION when running the geoserver-release job.

BRANCH

The branch being released from. The same value specified for BRANCH when running the geoserver-release job.

This job will rsync all the artifacts located at:

http://build.geoserver.org/geoserver/release/<RELEASE>

to the SourceForge FRS server. Navigate to Sourceforge and verify that the artifacts have been uploaded properly. If this is the latest stable release, set the necessary flags on the .exe, .dmg and .bin artifacts so that they show up as the appropriate default for users downloading on the Windows, OSX, and Linux platforms.

Release notes¶

This job will tag the release located in:

https://github.com/geoserver/geoserver/tags/<RELEASE>

Publish JIRA markdown release notes to github tag:

1. Select the correct release from JIRA Releases page.

2. From the release page, locate the Release notes button at the top of the page to open the release notes edit

3. Generate release notes as markdown:

   • Select format Markdown

   • Layout: Issue key with link

   • Issue types: Bug and Improvement

   Change the heading to Release notes, and apply the change with Done.

   Use Copy to clipboard to obtain the markdown, similar to the following:

   # Release notes
   
   ### Bug
   
   [GEOS-10264](https://osgeo-org.atlassian.net/browse/GEOS-10264) Address startup warning File option not set for appender \[geoserverlogfile\]
   
   [GEOS-10263](https://osgeo-org.atlassian.net/browse/GEOS-10263) WPSRequestBuilderTest assumes that JTS:area is the first process in the list
   
   [GEOS-10255](https://osgeo-org.atlassian.net/browse/GEOS-10255) i18n user interface inconsistent layout with br tags used for layout
   
   [GEOS-10245](https://osgeo-org.atlassian.net/browse/GEOS-10245) jdbcconfig: prefixedName filter field not updated
   
   [GEOS-9950](https://osgeo-org.atlassian.net/browse/GEOS-9950) MapPreviewPage logs unable to find property: format.wfs.text/csv continuously
   
   ### Improvement
   
   [GEOS-10246](https://osgeo-org.atlassian.net/browse/GEOS-10246) jdbcconfig: performance slow-down from unnecessary transactions
   
   ### New Feature
   
   [GEOS-10223](https://osgeo-org.atlassian.net/browse/GEOS-10223) Support MBTiles in OGC Tiles API
   
   ### Task
   
   [GEOS-10247](https://osgeo-org.atlassian.net/browse/GEOS-10247) Reuse of service documentation references for workspace, metadata and default language
   

4. Navigate to github tags https://github.com/geoserver/geoserver/tags

   Locate the new tag from the list, and use … ‣ Create release

   • Release title: GeoServer 2.20.0

   • Write: Paste the markdown from Jira release notes editor

   Use Publish release button to publish the release notes.

Create the download page¶

The GeoServer web site is managed as a GitHub Pages repository. Follow the instructions in the repository to create a download page for the release. This requires the url of the blog post announcing the release, so wait until after you have posted the announcement to do this.

Post the Documentation¶

1. Log in to the server.

2. Create the following new directories:

   /var/www/docs.geoserver.org/htdocs/a.b.c
   /var/www/docs.geoserver.org/htdocs/a.b.c/developer
   /var/www/docs.geoserver.org/htdocs/a.b.c/user
   

   where a.b.c is the full release number.

3. Download the HTML documentation archive from the GeoServer download page, and extract the contents of both user manuals to the appropriate directory:

   cd /var/www/docs.geoserver.org/htdocs/a.b.c/
   sudo wget http://downloads.sourceforge.net/geoserver/geoserver-a.b.c-htmldoc.zip
   sudo unzip geoserver-a.b.c-htmldoc.zip
   sudo rm geoserver-a.b.c-htmldoc.zip
   

   Note

   Steps 2 and 3 have now been automated by a bash script on the server, and can be completed by executing:

   sudo /var/www/docs.geoserver.org/htdocs/postdocs.sh a.b.c
   

4. Open the file /var/www/docs.geoserver.org/htdocs/index.html in a text editor.

5. Add a new entry in the table for the most recent release:

   <tr>
     <td><strong><a href="http://geoserver.org/release/a.b.c/">a.b.c</a></strong></td>
     <td><a href="a.b.c/user/">User Manual</a></td>
     <td><a href="a.b.c/developer/">Developer Manual</a></td>
   </tr>
   

6. Save and close this file.

Announce the Release¶

Subject: GeoServer 2.5.1 Released

The GeoServer team is happy to announce the release of GeoServer 2.5.1.

The release is available for download from:

http://geoserver.org/release/2.5.1/

GeoServer 2.5.1 is the next the stable release of GeoServer and is recommended for production deployment.

This release comes with some exciting new features. The new and
noteworthy include:

* By popular request Top/Bottom labels when configuring layer group order
* You can now identify GeoServer “nodes” in a cluster by configuring a label and color in the UI. Documentation and example in the user guide.
* Have you ever run GeoServer and not quite gotten your file permissions correct? GeoServer now has better logging when it cannot your data directory and is required to “fall back” to the embedded data directory during start up.
* We have a new GRIB community module (community modules are not in the release until they pass a    QA check, but great to see new development taking shape)
* Documentation on the jp2kak extension now in the user guide
* Additional documentation for the image mosaic in the user guide with tutorials covering the plugin, raster time-series, time and elevation and footprint management.
* WCS 2.0 support continues to improve with DescribeCoverage now supporting null values
* Central Authentication Service (CAS) authentication has received a lot of QA this release and is now available in the GeoServer 2.5.x series.
* This release is made in conjunction with GeoTools 11.1

Along with many other improvements and bug fixes:

* https://osgeo-org.atlassian.net/jira/secure/ReleaseNote.jspa?projectId=10000&version=10164

Thanks to Andrea and Jody (GeoSolutions and Boundless) for publishing this release. A very special thanks to all those who contributed bug fixes, new
features, bug reports, and testing to this release.

--
The GeoServer Team