Installation Of OpenFire XMPP Server To Exchange Messages¶

Setting up PostgreSQL database backend¶

For the purposes of running a private XMPP communication platform, we can safely stick with PostgreSQL 9.2 which is stable and comes in CentOS 7 by default.

# as root

$> yum install -y postgresql postgresql-server postgresql-devel postgresql-libs

# After PostgreSQL packages are installed, enable PostgreSQL to start after each reboot.

$> systemctl enable postgresql.service

# Initialize directory structure and postgres system database.

$> postgresql-setup initdb

# And start the service.

$> systemctl start postgresql.service

Postgres installation is now up and running, lets proceed with setting up the specific database and the dedicated user for OpenFire, together with authentication method and administration password.

For full administration access, switch to postgres user.

su postgres

# as postgres

$> createdb openfire
$> createuser -P openfire

# The '-P' parameter ensures that the shell will explicitly ask for user's password and you will need to type it in. Enter the password twice

   R3m0T3wP5

$> psql -U postgres -d postgres -c "ALTER USER postgres WITH PASSWORD 'R3m0T3wP5';"

Postgres user is secured with the new password. Lets put authentication methods in practice and force every application or shell login to prompt for these passwords.

# as postgres

$> vim /var/lib/pgsql/data/pg_hba.conf

# Scroll down to the bottom of the file and replace all peer and ident strings with md5 string.
# The configuration should look like this:

   # TYPE DATABASE USER CIDR-ADDRESS METHOD

   # "local" is for Unix domain socket connections only

   local      all         all                 md5

   # IPv4 local connections:

   host       all         all 127.0.0.1/32    md5

   # IPv6 local connections:

   host       all         all      ::1/128    md5

Go back from postgres shell (Ctrl+D) and restart postgresql service as root.

# as root

$> systemctl restart postgresql.service

Download and install Openfire from Ignite Realtime¶

Since OpenFire RPM package is not included in any major RHEL / CentOS / Fedora distribution repositories, it must be downloaded directly from Ignite Realtime website.

# as root

$> wget http://www.igniterealtime.org/downloadServlet?filename=openfire/openfire-3.10.0-1.i386.rpm -O openfire-3.10.0-1.i386.rpm

# This package come in 32bit version only, so in case we run this installation on x86_64 system, we need to make sure to install coresponding 32bit libraries as well.

$> yum install -y /root/openfire-3.9.3-1.i386.rpm

$> yum install -y glibc.i686

Enable the openfire service and start it

# as root

$> chkconfig openfire on

$> systemctl start openfire.service

# We need to open the firewall ports in order to expose the gui to the outside

$> firewall-cmd --permanent --zone=public --add-port=9090/tcp
$> firewall-cmd --permanent --zone=public --add-port=9091/tcp
$> firewall-cmd --reload

Configuration of Openfire server

Move the browser to the url

http://YOUR-SERVER-IP:9090

Choose preferable language and hit Contine

Specify the server Domain as

geoserver.org

Choose the Standard Database Connection in the next section

Provide the Database connection parameters for the PostgreSQL DB in the standard connection section.

The password for the user openfire is the same provided in the PostgreSQL DB setup (see above).

If there are no connection issues, choose Default value on the users profile settings section.

Create the Administrator account in the next section.

The password *must* match the one specified in the remoteProcess.properties file

R3m0T3wP5

The initial setup is now complete. Log into the system using the newly created admin account.

Move to the Server Certificates section of the Server Settings tab panel.

Warning

This passage is not needed anymnore on Openfire 4.0+. At least the management of the certificates is a bit different. Please refer to the specific Openfire documentation for more information.

Make sure that the self-signed certificates have been correctly generated and click on here in order to restart the server

Warning

This passage is not needed anymnore on Openfire 4.0+. At least the management of the certificates is a bit different. Please refer to the specific Openfire documentation for more information.

The same section now shows the server certificates and won’t ask for another restart unless the certificates are generated again.

Update the Security Settings in order to allow the server accepting self-signed certificates on secured connections.

Warning

This passage is not needed anymnore on Openfire 4.0+. At least the management of the certificates is a bit different. Please refer to the specific Openfire documentation for more information.

Create the default channel as shown in the next figure.

Create the management channel as shown in the next figure. Pay attention to the Room Options and specify the password for the channel

R3m0T3wP5

Double check that the channels have been correctly created and they appear in the Group Chat Rooms.

Restart GeoServer

# as root

$> systemctl restart geoserver

After the GeoServer has successfully restarted, double check that it is connected to the server using the admin credentials.

It is *very* important that the user is shown as Authenticated.

Check also that the user is registered to the XMPP channels created above.

Firewall Rules For XMPP Ports¶

By default the TCP Ports where the XMPP Server is listening for incoming connection are closed to the outside. Therefore it is necessary to enable the Firewall rules at least for the Openfire default secured port 5223 unless it has been changed by the user during the server setup.

In order to do that issue the following commands:

# as root

# We need to open the firewall ports in order to expose the gui to the outside

$> firewall-cmd --permanent --zone=public --add-port=5222/tcp
$> firewall-cmd --permanent --zone=public --add-port=5223/tcp

$> firewall-cmd --reload

Forward Proxy to Apache HTTPD Server¶

The procedures described in this section allows to expose GeoServer via HTTPD through Apache HTTPD Server.

Those steps are not mandatory and the procedure may change accordingly to the final deployment on production systems.

In order to install Apache HTTPD Server proceed as follows:

# as root

$> yum -y install httpd mod_ssl

$> vi /etc/httpd/conf.d/forward-proxy.conf

   ProxyRequests Off

   ProxyPass /geoserver ajp://localhost:8009/geoserver
   ProxyPassReverse /geoserver ajp://localhost:8009/geoserver

$> systemctl enable httpd.service

$> service httpd restart

Selinux, enabled by default, needs to be instructed to allow http network connections. This can be done by running the command:

# as root

$> /usr/sbin/setsebool -P httpd_can_network_connect 1

Shared Folder through the NFS protocol¶

The next steps describe how to setup the system in order to expose a Shared Network Folder which will be used to store the outcomes of the remote processing.

The following procedures are not mandatory and the final deployment on the production system may be configured to use different protocols and frameworks to expose shared file-systems.

The setup and initial configuration of the NFS packages can be done by following the next procedure:

# as root

$> yum -y install nfs-utils

$> vi /etc/idmapd.conf

   # The following should be set to the local NFSv4 domain name

   # The default is the host's DNS domain name.
   Domain = geoserver.org

Creating and exposing a shared folder is possible by following the next steps:

1. as root

2. Create the physical folder structure to be exposed via the Network Filesystem

$> mkdir /share
$> mkdir /share/xmpp_data
$> mkdir /share/xmpp_data/output
$> mkdir /share/xmpp_data/resource_dir

3. Modify the rights in order to allow

   $> chmod -Rf 777 /share
   

3. Once the physical folder is ready it must be exposed via the exports

$> vi /etc/exports

4. write settings for NFS exports

/share host_ip/24(rw,no_root_squash)

4. Restart the NFS services

$> systemctl start rpcbind nfs-server

$> systemctl enable rpcbind nfs-server

Selinux, enabled by default, needs to be instructed to allow NFS connections. This can be done by running the following commands:

# as root

$> setsebool -P httpd_use_nfs=1

$> setsebool -P samba_share_nfs=1

$> setsebool -P samba_export_all_ro=1

$> setsebool -P samba_export_all_rw=1