Polygons

Polygons are two dimensional shapes that contain both an outer edge (or “stroke”) and an inside (or “fill”). A polygon can be thought of as an irregularly-shaped point and is styled in similar ways to points.

Example polygons layer

The polygons layer used below contains county information for a fictional country. For reference, the attribute table for the polygons is included below.

fid (Feature ID)

name (County name)

pop (Population)

polygon.1

Irony County

412234

polygon.2

Tracker County

235421

polygon.3

Dracula County

135022

polygon.4

Poly County

1567879

polygon.5

Bearing County

201989

polygon.6

Monte Cristo County

152734

polygon.7

Massive County

67123

polygon.8

Rhombus County

198029

Download the polygons shapefile

Simple polygon

This example shows a polygon filled in blue.

../../../_images/polygon_simplepolygon.png

Simple polygon

Code

Download the "Simple polygon" YSLD

1 title: 'YSLD Cook Book: Simple polygon'
2 feature-styles:
3 - name: name
4   rules:
5   - symbolizers:
6     - polygon:
7         fill-color: '#000080'

Details

There is one rule in one feature style for this style, which is the simplest possible situation. (All subsequent examples will share this characteristic unless otherwise specified.) Styling polygons is accomplished via the polygon symbolizer (lines 6-7). Line 7 specifies dark blue ('#000080') as the polygon’s fill color.

Note

The light-colored borders around the polygons in the figure are artifacts of the renderer caused by the polygons being adjacent. There is no border in this style.

Simple polygon with stroke

This example adds a 2 pixel white stroke to the Simple polygon example.

../../../_images/polygon_simplepolygonwithstroke.png

Simple polygon with stroke

Code

Download the "Simple polygon with stroke" YSLD

1 title: 'YSLD Cook Book: Simple polygon with stroke'
2 feature-styles:
3 - name: name
4   rules:
5   - symbolizers:
6     - polygon:
7         stroke-color: '#FFFFFF'
8         stroke-width: 2
9         fill-color: '#000080'

Details

This example is similar to the Simple polygon example above, with the addition of stroke parameters (lines 7-8). Line 7 sets the color of stroke to white ('#FFFFFF') and line 8 sets the width of the stroke to 2 pixels.

Transparent polygon

This example builds on the Simple polygon with stroke example and makes the fill partially transparent by setting the opacity to 50%.

../../../_images/polygon_transparentpolygon.png

Transparent polygon

Code

Download the "Transparent polygon" YSLD

 1 title: 'YSLD Cook Book: Transparent polygon'
 2 feature-styles:
 3 - name: name
 4   rules:
 5   - symbolizers:
 6     - polygon:
 7         stroke-color: '#FFFFFF'
 8         stroke-width: 2
 9         fill-color: '#000080'
10         fill-opacity: 0.5

Details

This example is similar to the Simple polygon with stroke example, save for defining the fill’s opacity in line 10. The value of 0.5 results in partially transparent fill that is 50% opaque. An opacity value of 1 would draw the fill as 100% opaque, while an opacity value of 0 would result in a completely transparent (0% opaque) fill. In this example, since the background is white, the dark blue looks lighter. Were the points imposed on a dark background, the resulting color would be darker.

Graphic fill

This example fills the polygons with a tiled graphic.

../../../_images/polygon_graphicfill.png

Graphic fill

Code

Download the "Graphic fill" YSLD

 1 title: 'YSLD Cook Book: Graphic fill'
 2 feature-styles:
 3 - name: name
 4   rules:
 5   - symbolizers:
 6     - polygon:
 7         fill-color: '#808080'
 8         fill-graphic:
 9           size: 93
10           symbols:
11           - external:
12               url: colorblocks.png
13               format: image/png

Details

This style fills the polygon with a tiled graphic. This is known as an external in YSLD, to distinguish it from commonly-used shapes such as squares and circles that are “internal” to the renderer. Lines 11-13 specify details for the graphic, with line 12 setting the path and file name of the graphic and line 13 indicating the file format (MIME type) of the graphic (image/png). Although a full URL could be specified if desired, no path information is necessary in line 12 because this graphic is contained in the same directory as the YSLD. Line 9 determines the height of the displayed graphic in pixels; if the value differs from the height of the graphic then it will be scaled accordingly while preserving the aspect ratio.

../../../_images/colorblocks.png

Graphic used for fill

Hatching fill

This example fills the polygons with a hatching pattern.

../../../_images/polygon_hatchingfill.png

Hatching fill

Code

Download the "Hatching fill" YSLD

 1 title: 'YSLD Cook Book: Hatching fill'
 2 feature-styles:
 3 - name: name
 4   rules:
 5   - symbolizers:
 6     - polygon:
 7         fill-color: '#808080'
 8         fill-graphic:
 9           size: 16
10           symbols:
11           - mark:
12               shape: shape://times
13               stroke-color: '#990099'
14               stroke-width: 1

Details

In this example, there is a fill-graphic parameter as in the Graphic fill example, but a mark (lines 11-14) is used instead of an external. Line 12 specifies a “times” symbol (an “x”) be tiled throughout the polygon. Line 13 sets the color to purple ('#990099'), line 14 sets the width of the hatches to 1 pixel, and line 9 sets the size of the tile to 16 pixels. Because hatch tiles are always square, the size sets both the width and the height.

Polygon with default label

This example shows a text label on the polygon. In the absence of any other customization, this is how a label will be displayed.

../../../_images/polygon_polygonwithdefaultlabel.png

Polygon with default label

Code

Download the "Polygon with default label" YSLD

 1 title: 'YSLD Cook Book: Polygon with default label'
 2 feature-styles:
 3 - name: name
 4   rules:
 5   - symbolizers:
 6     - polygon:
 7         stroke-color: '#FFFFFF'
 8         stroke-width: 2
 9         fill-color: '#40FF40'
10     - text:
11         label: ${name}
12         placement: point

Details

In this example there is a polygon symbolizer and a text symbolizer. Lines 6-9 comprise the polygon symbolizer. The fill of the polygon is set on line 7 to a light green ('#40FF40') while the stroke of the polygon is set on lines 8-9 to white ('#FFFFFF') with a thickness of 2 pixels. The label is set in the text symbolizer on lines 10-12, with line 11 determining what text to display, in this case the value of the “name” attribute. (Refer to the attribute table in the Example polygons layer section if necessary.) All other details about the label are set to the renderer default, which here is Times New Roman font, font color black, and font size of 10 pixels.

Label halo

This example alters the look of the Polygon with default label by adding a white halo to the label.

../../../_images/polygon_labelhalo.png

Label halo

Code

Download the "Label halo" YSLD

 1 title: 'YSLD Cook Book: Label halo'
 2 feature-styles:
 3 - name: name
 4   rules:
 5   - symbolizers:
 6     - polygon:
 7         stroke-color: '#FFFFFF'
 8         stroke-width: 2
 9         fill-color: '#40FF40'
10     - text:
11         label: ${name}
12         halo:
13           fill-color: '#FFFFFF'
14           radius: 3
15         placement:
16           type: point

Details

This example is similar to the Polygon with default label, with the addition of a halo around the labels on lines 12-14. A halo creates a color buffer around the label to improve label legibility. Line 14 sets the radius of the halo, extending the halo 3 pixels around the edge of the label, and line 13 sets the color of the halo to white ('#FFFFFF'). Since halos are most useful when set to a sharp contrast relative to the text color, this example uses a white halo around black text to ensure optimum readability.

Polygon with styled label

This example improves the label style from the Polygon with default label example by centering the label on the polygon, specifying a different font name and size, and setting additional label placement optimizations.

../../../_images/polygon_polygonwithstyledlabel.png

Polygon with styled label

Code

Download the "Polygon with styled label" YSLD

 1 title: 'YSLD Cook Book: Polygon with styled label'
 2 feature-styles:
 3 - name: name
 4   rules:
 5   - symbolizers:
 6     - polygon:
 7         stroke-color: '#FFFFFF'
 8         stroke-width: 2
 9         fill-color: '#40FF40'
10     - text:
11         label: ${name}
12         fill-color: '#000000'
13         font-family: Arial
14         font-size: 11
15         font-style: normal
16         font-weight: bold
17         placement: point
18         anchor: [0.5,0.5]
19         x-autoWrap: 60
20         x-maxDisplacement: 150

Details

This example is similar to the Polygon with default label example, with additional styling options within the text symbolizer on lines 13-21. Lines 13-16 set the font styling. Line 13 sets the font family to be Arial, line 14 sets the font size to 11 pixels, line 15 sets the font style to “normal” (as opposed to “italic” or “oblique”), and line 16 sets the font weight to “bold” (as opposed to “normal”).

The anchor parameter on line 18 centers the label by positioning it 50% (or 0.5) of the way horizontally and vertically along the centroid of the polygon.

Finally, there are two added touches for label placement optimization: line 20 ensures that long labels are split across multiple lines by setting line wrapping on the labels to 60 pixels, and line 21 allows the label to be displaced by up to 150 pixels. This ensures that labels are compacted and less likely to spill over polygon boundaries. Notice little Massive County in the corner, whose label is now displayed.”

Attribute-based polygon

This example styles the polygons differently based on the “pop” (Population) attribute.

../../../_images/polygon_attributebasedpolygon.png

Attribute-based polygon

Code

Download the "Attribute-based polygon" YSLD

 1 title: 'YSLD Cook Book: Attribute-based polygon'
 2 feature-styles:
 3 - name: name
 4   rules:
 5   - name: SmallPop
 6     title: Less Than 200,000
 7     filter: ${pop < '200000'}
 8     symbolizers:
 9     - polygon:
10         fill-color: '#66FF66'
11   - name: MediumPop
12     title: 200,000 to 500,000
13     filter: ${pop >= '200000' AND pop < '500000'}
14     symbolizers:
15     - polygon:
16         fill-color: '#33CC33'
17   - name: LargePop
18     title: ${Greater Than 500,000}
19     filter: pop > '500000'
20     symbolizers:
21     - polygon:
22         fill-color: '#009900'

Details

Note

Refer to the Example polygons layer to see the attributes for the layer. This example has eschewed labels in order to simplify the style, but you can refer to the example Polygon with styled label to see which attributes correspond to which polygons.

Each polygon in our fictional country has a population that is represented by the population (“pop”) attribute. This style contains three rules that alter the fill based on the value of “pop” attribute, with smaller values yielding a lighter color and larger values yielding a darker color.

The three rules are designed as follows:

Rule order

Rule name

Population (pop)

Color

1

SmallPop

Less than 200,000

#66FF66

2

MediumPop

200,000 to 500,000

#33CC33

3

LargePop

Greater than 500,000

#009900

The order of the rules does not matter in this case, since each shape is only rendered by a single rule.

The first rule, on lines 5-10, specifies the styling of polygons whose population attribute is less than 200,000. Line 7 sets this filter, denoting the attribute (“pop”), to be “less than” the value of 200,000. The color of the polygon fill is set to a light green ('#66FF66') on line 10.

The second rule, on lines 11-16, is similar, specifying a style for polygons whose population attribute is greater than or equal to 200,000 but less than 500,000. The filter is set on line 13. This filter specifies two criteria instead of one: a “greater than or equal to” and a “less than” filter. These criteria are joined by AND, which mandates that both filters need to be true for the rule to be applicable. The color of the polygon fill is set to a medium green on ('#33CC33') on line 16.

The third rule, on lines 17-22, specifies a style for polygons whose population attribute is greater than or equal to 500,000. The filter is set on line 19. The color of the polygon fill is the only other difference in this rule, which is set to a dark green ('#009900') on line 22.

Zoom-based polygon

This example alters the style of the polygon at different zoom levels.

../../../_images/polygon_zoombasedpolygonlarge.png

Zoom-based polygon: Zoomed in

../../../_images/polygon_zoombasedpolygonmedium.png

Zoom-based polygon: Partially zoomed

../../../_images/polygon_zoombasedpolygonsmall.png

Zoom-based polygon: Zoomed out

Code

Download the "Zoom-based polygon" YSLD

 1 title: 'YSLD Cook Book: Zoom-based polygon'
 2 feature-styles:
 3 - name: name
 4   rules:
 5   - name: Large
 6     scale: [min,1.0e8]
 7     symbolizers:
 8     - polygon:
 9         stroke-color: '#000000'
10         stroke-width: 7
11         fill-color: '#0000CC'
12     - text:
13         label: ${name}
14         fill-color: '#FFFFFF'
15         font-family: Arial
16         font-size: 14
17         font-style: normal
18         font-weight: bold
19         placement: point
20         anchor: [0.5,0.5]
21   - name: Medium
22     scale: [1.0e8,2.0e8]
23     symbolizers:
24     - polygon:
25         stroke-color: '#000000'
26         stroke-width: 4
27         fill-color: '#0000CC'
28   - name: Small
29     scale: [2.0e8,max]
30     symbolizers:
31     - polygon:
32         stroke-color: '#000000'
33         stroke-width: 1
34         fill-color: '#0000CC'

Details

It is often desirable to make shapes larger at higher zoom levels when creating a natural-looking map. This example varies the thickness of the lines according to the zoom level. Polygons already do this by nature of being two dimensional, but another way to adjust styling of polygons based on zoom level is to adjust the thickness of the stroke (to be larger as the map is zoomed in) or to limit labels to only certain zoom levels. This is ensures that the size and quantity of strokes and labels remains legible and doesn’t overshadow the polygons themselves.

Zoom levels (or more accurately, scale denominators) refer to the scale of the map. A scale denominator of 10,000 means the map has a scale of 1:10,000 in the units of the map projection.

Note

Determining the appropriate scale denominators (zoom levels) to use is beyond the scope of this example.

This style contains three rules, defined as follows:

Rule order

Rule name

Scale denominator

Stroke width

Label display?

1

Large

1:100,000,000 or less

7

Yes

2

Medium

1:100,000,000 to 1:200,000,000

4

No

3

Small

Greater than 1:200,000,000

2

No

The first rule, on lines 5-20, is for the smallest scale denominator, corresponding to when the view is “zoomed in”. The scale rule is set on line 6 such that the rule will apply only where the scale denominator is 100,000,000 or less. Line 11 defines the fill as blue ('#0000CC'). Note that the fill is kept constant across all rules regardless of the scale denominator. As in the Polygon with default label or Polygon with styled label examples, the rule also contains a text symbolizer at lines 12-20 for drawing a text label on top of the polygon. Lines 15-18 set the font information to be Arial, 14 pixels, and bold with no italics. The label is centered both horizontally and vertically along the centroid of the polygon on by setting anchor to be [0.5, 0.5] (or 50%) on line 20. Finally, the color of the font is set to white ('#FFFFFF') in line 14.

The second rule, on lines 21-27, is for the intermediate scale denominators, corresponding to when the view is “partially zoomed”. The scale rules on lines 22 set the rule such that it will apply to any map with a scale denominator between 100,000,000 and 200,000,000. (The lower bound is inclusive and the upper bound is exclusive, so a zoom level of exactly 200,000,000 would not apply here.) Aside from the scale, there are two differences between this rule and the first: the width of the stroke is set to 4 pixels on line 26 and a text symbolizer is not present so that no labels will be displayed.

The third rule, on lines 28-34, is for the largest scale denominator, corresponding to when the map is “zoomed out”. The scale rule is set on line 29 such that the rule will apply to any map with a scale denominator of 200,000,000 or greater. Again, the only differences between this rule and the others are the width of the lines, which is set to 1 pixel on line 33, and the absence of a text symbolizer so that no labels will be displayed.

The resulting style produces a polygon stroke that gets larger as one zooms in and labels that only display when zoomed in to a sufficient level.

Previous: Lines
Next: Rasters