WMS reference

Introduction

The OGC Web Map Service (WMS) specification defines an HTTP interface for requesting georeferenced map images from a server. GeoServer supports WMS 1.1.1, the most widely used version of WMS, as well as WMS 1.3.0.

The relevant OGC WMS specifications are:

GeoServer also supports some extensions to the WMS specification made by the Styled Layer Descriptor (SLD) standard to control the styling of the map output. These are defined in:

Benefits of WMS

WMS provides a standard interface for requesting a geospatial map image. The benefit of this is that WMS clients can request images from multiple WMS servers, and then combine them into a single view for the user. The standard guarantees that these images can all be overlaid on one another as they actually would be in reality. Numerous servers and clients support WMS.

Operations

WMS requests can perform the following operations:

Operation

Description

Exceptions

If an exception occur

GetCapabilities

Retrieves metadata about the service, including supported operations and parameters, and a list of the available layers

GetMap

Retrieves a map image for a specified area and content

GetFeatureInfo (optional)

Retrieves the underlying data, including geometry and attribute values, for a pixel location on a map

DescribeLayer (optional)

Indicates the WFS or WCS to retrieve additional information about the layer.

GetLegendGraphic (optional)

Retrieves a generated legend for a map

Exceptions

Formats in which WMS can report exceptions. The supported values for exceptions are:

Format

Syntax

Notes

XML

EXCEPTIONS=application/vnd.ogc.se_xml

Xml output. (The default format)

INIMAGE

EXCEPTIONS=application/vnd.ogc.se_inimage

Generates an image

BLANK

EXCEPTIONS=application/vnd.ogc.se_blank

Generates a blank image

PARTIALMAP

EXCEPTIONS=application/vnd.gs.wms_partial

This is a GeoServer vendor parameter and only applicable for getMap requests. Returns everything that was rendered at the time the rendering process threw an exception. Can be used with the WMS Configuration Limits to return a partial image even if the request is terminated for exceeding one of these limits. It also works with the timeout vendor parameter.

JSON

EXCEPTIONS=application/json

Simple Json representation.

JSONP

EXCEPTIONS=text/javascript

Return a JsonP in the form: paddingOutput(…jsonp…). See WMS vendor parameters to change the callback name. Note that this format is disabled by default (See Global variables affecting WMS).

GetCapabilities

The GetCapabilities operation requests metadata about the operations, services, and data (“capabilities”) that are offered by a WMS server.

The parameters for the GetCapabilities operation are:

Parameter

Required?

Description

service

Yes

Service name. Value is WMS.

version

Yes

Service version. Value is one of 1.0.0, 1.1.0, 1.1.1, 1.3.0.

request

Yes

Operation name. Value is GetCapabilities.

GeoServer provides the following vendor-specific parameters for the GetCapabilities operation. They are fully documented in the WMS vendor parameters section.

Parameter

Required?

Description

namespace

No

limits response to layers in a given namespace

format

No

request the capabilities document in a certain format

rootLayer

No

Flag to enable/disable the standard Root top level Layer element. Values are true or false. When false, the Root element will be included only if there are multiple top level layers, if there is only one, it will be the root layer itself. When specified, will override the global WMS setting or layer / group setting for the same behaviour.

A example GetCapabilities request is:

http://localhost:8080/geoserver/wms?
service=wms&
version=1.1.1&
request=GetCapabilities

There are three parameters being passed to the WMS server, service=wms, version=1.1.1, and request=GetCapabilities. The service parameter tells the WMS server that a WMS request is forthcoming. The version parameter refers to which version of WMS is being requested. The request parameter specifies the GetCapabilities operation. The WMS standard requires that requests always includes these three parameters. GeoServer relaxes these requirements (by setting the default version if omitted), but for standard-compliance they should always be specified.

The response is a Capabilities XML document that is a detailed description of the WMS service. It contains three main sections:

Service

Contains service metadata such as the service name, keywords, and contact information for the organization operating the server.

Request

Describes the operations the WMS service provides and the parameters and output formats for each operation. If desired GeoServer can be configured to disable support for certain WMS operations.

Layer

Lists the available coordinate systems and layers. In GeoServer layers are named in the form “namespace:layer”. Each layer provides service metadata such as title, abstract and keywords.

GetMap

The GetMap operation requests that the server generate a map. The core parameters specify one or more layers and styles to appear on the map, a bounding box for the map extent, a target spatial reference system, and a width, height, and format for the output. The information needed to specify values for parameters such as layers, styles and srs can be obtained from the Capabilities document.

The response is a map image, or other map output artifact, depending on the format requested. GeoServer provides a wide variety of output formats, described in WMS output formats.

The standard parameters for the GetMap operation are:

Parameter

Required?

Description

service

Yes

Service name. Value is WMS.

version

Yes

Service version. Value is one of 1.0.0, 1.1.0, 1.1.1, 1.3.0.

request

Yes

Operation name. Value is GetMap.

layers

Yes

Layers to display on map. Value is a comma-separated list of layer names.

styles

Yes

Styles in which layers are to be rendered. Value is a comma-separated list of style names, or empty if default styling is required. Style names may be empty in the list, to use default layer styling.

srs or crs

Yes

Spatial Reference System for map output. Value is in form EPSG:nnn. crs is the parameter key used in WMS 1.3.0.

bbox

Yes

Bounding box for map extent. Value is minx,miny,maxx,maxy in units of the SRS.

width

Yes

Width of map output, in pixels.

height

Yes

Height of map output, in pixels.

format

Yes

Format for the map output. See WMS output formats for supported values.

transparent

No

Whether the map background should be transparent. Values are true or false. Default is false

bgcolor

No

Background color for the map image. Value is in the form RRGGBB. Default is FFFFFF (white).

exceptions

No

Format in which to report exceptions. Default value is application/vnd.ogc.se_xml.

time

No

Time value or range for map data. See Time Support in GeoServer WMS for more information.

sld

No

A URL referencing a StyledLayerDescriptor XML file which controls or enhances map layers and styling

sld_body

No

A URL-encoded StyledLayerDescriptor XML document which controls or enhances map layers and styling

GeoServer provides a number of useful vendor-specific parameters for the GetMap operation. These are documented in the WMS vendor parameters section.

Example WMS request for topp:states layer to be output as a PNG map image in SRS EPGS:4326 and using default styling is:

http://localhost:8080/geoserver/wms?
request=GetMap
&service=WMS
&version=1.1.1
&layers=topp%3Astates
&styles=population
&srs=EPSG%3A4326
&bbox=-145.15104058007,21.731919794922,-57.154894212888,58.961058642578&
&width=780
&height=330
&format=image%2Fpng

The standard specifies many of the parameters as being mandatory, GeoServer provides the WMS Reflector to allow many of them to be optionally specified.

Experimenting with this feature is a good way to get to know the GetMap parameters.

Example WMS request using a GetMap XML document is:

<?xml version="1.0" encoding="UTF-8"?>
<ogc:GetMap xmlns:ogc="http://www.opengis.net/ows"
            xmlns:gml="http://www.opengis.net/gml"
   version="1.1.1" service="WMS">
   <StyledLayerDescriptor version="1.0.0">
      <NamedLayer>
        <Name>topp:states</Name>
        <NamedStyle><Name>population</Name></NamedStyle>
      </NamedLayer>
   </StyledLayerDescriptor>
   <BoundingBox srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
      <gml:coord><gml:X>-130</gml:X><gml:Y>24</gml:Y></gml:coord>
      <gml:coord><gml:X>-55</gml:X><gml:Y>50</gml:Y></gml:coord>
   </BoundingBox>
   <Output>
      <Format>image/png</Format>
      <Size><Width>550</Width><Height>250</Height></Size>
   </Output>
</ogc:GetMap>

Time

As of GeoServer 2.2.0, GeoServer supports a TIME attribute for WMS GetMap requests as described in version 1.3.0 of the WMS specification. This parameter allows filtering a dataset by temporal slices as well as spatial tiles for rendering. See Time Support in GeoServer WMS for information on its use.

GetFeatureInfo

The GetFeatureInfo operation requests the spatial and attribute data for the features at a given location on a map. It is similar to the WFS GetFeature operation, but less flexible in both input and output. Since GeoServer provides a WFS service we recommend using it instead of GetFeatureInfo whenever possible.

The one advantage of GetFeatureInfo is that the request uses an (x,y) pixel value from a returned WMS image. This is easier to use for a naive client that is not able to perform true geographic referencing.

The standard parameters for the GetFeatureInfo operation are:

Parameter

Required?

Description

service

Yes

Service name. Value is WMS.

version

Yes

Service version. Value is one of 1.0.0, 1.1.0, 1.1.1, 1.3.0.

request

Yes

Operation name. Value is GetFeatureInfo.

layers

Yes

See GetMap

styles

Yes

See GetMap

srs or crs

Yes

See GetMap

bbox

Yes

See GetMap

width

Yes

See GetMap

height

Yes

See GetMap

query_layers

Yes

Comma-separated list of one or more layers to query.

info_format

No

Format for the feature information response. See below for values.

feature_count

No

Maximum number of features to return. Default is 1.

x or i

Yes

X ordinate of query point on map, in pixels. 0 is left side. i is the parameter key used in WMS 1.3.0.

y or j

Yes

Y ordinate of query point on map, in pixels. 0 is the top. j is the parameter key used in WMS 1.3.0.

exceptions

No

Format in which to report exceptions. The default value is application/vnd.ogc.se_xml.

Note: If you are sending a GetFeatureInfo request against a layergroup, all the layers in that layergroup must be set as “Queryable” to get a result (See WMS Settings on Layers page)

GeoServer supports a number of output formats for the GetFeatureInfo response. Server-styled HTML is the most commonly-used format. For maximum control and customisation the client should use GML3 and style the raw data itself. The supported formats are:

Format

Syntax

Notes

TEXT

info_format=text/plain

Simple text output. (The default format)

GML 2

info_format=application/vnd.ogc.gml

Works only for Simple Features (see Complex Features)

GML 3

info_format=application/vnd.ogc.gml/3.1.1

Works for both Simple and Complex Features (see Complex Features)

HTML

info_format=text/html

Uses HTML templates that are defined on the server. See HTML output format for information on how to template HTML output.

JSON

info_format=application/json

Simple Json representation. See GeoJSON output format for information on how to template Json output.

JSONP

info_format=text/javascript

Returns a JsonP in the form: parseResponse(...json...). See WMS vendor parameters to change the callback name. Note that this format is disabled by default (See Global variables affecting WMS).

GeoServer provides the following vendor-specific parameters for the GetFeatureInfo operation. They are fully documented in the WMS vendor parameters section.

Parameter

Required?

Description

buffer

No

width of search radius around query point.

cql_filter

No

Filter for returned data, in ECQL format

filter

No

Filter for returned data, in OGC Filter format

propertyName

No

Feature properties to be returned

exclude_nodata_result

No

When set to true, a NaN will be returned when the feature’s queried pixel value is nodata.

An example request for feature information from the topp:states layer in HTML format is:

http://localhost:8080/geoserver/wms?
request=GetFeatureInfo
&service=WMS
&version=1.1.1
&layers=topp%3Astates
&styles=
&srs=EPSG%3A4326
&format=image%2Fpng
&bbox=-145.151041%2C21.73192%2C-57.154894%2C58.961059
&width=780
&height=330
&query_layers=topp%3Astates
&info_format=text%2Fhtml
&feature_count=50
&x=353
&y=145
&exceptions=application%2Fvnd.ogc.se_xml

An example request for feature information in GeoJSON format is:

http://localhost:8080/geoserver/wms?
&INFO_FORMAT=application/json
&REQUEST=GetFeatureInfo
&EXCEPTIONS=application/vnd.ogc.se_xml
&SERVICE=WMS
&VERSION=1.1.1
&WIDTH=970&HEIGHT=485&X=486&Y=165&BBOX=-180,-90,180,90
&LAYERS=COUNTRYPROFILES:grp_administrative_map
&QUERY_LAYERS=COUNTRYPROFILES:grp_administrative_map
&TYPENAME=COUNTRYPROFILES:grp_administrative_map

The result will be:

{
"type":"FeatureCollection",
"features":[
   {
      "type":"Feature",
      "id":"dt_gaul_geom.fid-138e3070879",
      "geometry":{
         "type":"MultiPolygon",
         "coordinates":[
            [
               [
                  [
                     XXXXXXXXXX,
                     XXXXXXXXXX
                  ],
                  ...
                  [
                     XXXXXXXXXX,
                     XXXXXXXXXX
                  ]
               ]
            ]
         ]
      },
      "geometry_name":"at_geom",
      "properties":{
         "bk_gaul":X,
         "at_admlevel":0,
         "at_iso3":"XXX",
         "ia_name":"XXXX",
         "at_gaul_l0":X,
         "bbox":[
            XXXX,
            XXXX,
            XXXX,
            XXXX
         ]
      }
   }
],
"crs":{
   "type":"EPSG",
   "properties":{
      "code":"4326"
   }
},
"bbox":[
   XXXX,
   XXXX,
   XXXX,
   XXXX
]
}

DescribeLayer

The DescribeLayer operation is used primarily by clients that understand SLD-based WMS. In order to make an SLD one needs to know the structure of the data. WMS and WFS both have operations to do this, so the DescribeLayer operation just routes the client to the appropriate service.

The standard parameters for the DescribeLayer operation are:

Parameter

Required?

Description

service

Yes

Service name. Value is WMS.

version

Yes

Service version. Value is 1.1.1.

request

Yes

Operation name. Value is DescribeLayer.

layers

Yes

See GetMap

exceptions

No

Format in which to report exceptions. The default value is application/vnd.ogc.se_xml.

GeoServer supports a number of output formats for the DescribeLayer response. Server-styled HTML is the most commonly-used format. The supported formats are:

Format

Syntax

Notes

TEXT

output_format=text/xml

Same as default.

GML 2

output_format=application/vnd.ogc.wms_xml

The default format.

JSON

output_format=application/json

Simple Json representation.

JSONP

output_format=text/javascript

Return a JsonP in the form: paddingOutput(…jsonp…). See WMS vendor parameters to change the callback name. Note that this format is disabled by default (See Global variables affecting WMS).

An example request in XML (default) format on a layer is: :

http://localhost:8080/geoserver/topp/wms?service=WMS &version=1.1.1 &request=DescribeLayer &layers=topp:coverage

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE WMS_DescribeLayerResponse SYSTEM "http://localhost:8080/geoserver/schemas/wms/1.1.1/WMS_DescribeLayerResponse.dtd">
<WMS_DescribeLayerResponse version="1.1.1">
   <LayerDescription name="topp:coverage" owsURL="http://localhost:8080/geoserver/topp/wcs?" owsType="WCS">
      <Query typeName="topp:coverage"/>
   </LayerDescription>
</WMS_DescribeLayerResponse>

An example request for feature description in JSON format on a layer group is:

http://localhost:8080/geoserver/wms?service=WMS
&version=1.1.1
&request=DescribeLayer
&layers=sf:roads,topp:tasmania_roads,nurc:mosaic
&outputFormat=application/json

The result will be:

{
  version: "1.1.1",
  layerDescriptions: [
    {
        layerName: "sf:roads",
        owsURL: "http://localhost:8080/geoserver/wfs/WfsDispatcher?",
        owsType: "WFS",
        typeName: "sf:roads"
    },
    {
        layerName: "topp:tasmania_roads",
        owsURL: "http://localhost:8080/geoserver/wfs/WfsDispatcher?",
        owsType: "WFS",
        typeName: "topp:tasmania_roads"
    },
    {
        layerName: "nurc:mosaic",
        owsURL: "http://localhost:8080/geoserver/wcs?",
        owsType: "WCS",
        typeName: "nurc:mosaic"
    }
  ]

GetLegendGraphic

The GetLegendGraphic operation provides a mechanism for generating legend graphics as images, beyond the LegendURL reference of WMS Capabilities. It generates a legend based on the style defined on the server, or alternatively based on a user-supplied SLD. For more information on this operation and the various options that GeoServer supports see GetLegendGraphic.