Users, Groups, Roles

This section provides the configuration options for User/group services and Role services. In addition, users, groups, and roles themselves and can be added, edited, or removed. A great deal of configuration can be accomplished in this section and related pages.

User Group Services

In this menu, user/group services can be added, removed, or edited. By default, there is one user/group service in GeoServer, which is XML-based. It is encrypted with Weak PBE and uses the default password policy. It is also possible to have a user/group service based on JDBC, with or without JNDI.

../../_images/ugr_usergroup.png

User/group services

Clicking an existing user/group service will enable editing, while clicking the Add new link will configure a new user/group service.

There are three tabs for configuration: Settings, Users, and Groups.

Note

When creating a new user/group service, the form filled out initially can be found under the Settings tab.

Add new XML user/group service

To add a new XML user/group service, click the Add new link. XML is the default option. The following figure shows the configuration options for an XML user/group service.

../../_images/ugr_ugxmlsettings.png

Adding an XML user/group service

Option

Description

Name

The name of the user/group service

Password encryption

Sets the type of Password encryption. Options are Plain text, Weak PBE, Strong PBE, and Digest.

Password policy

Sets the password policy. Options are any active password policies as set in the Passwords section.

XML filename

Name of the file that will contain the user and group information. Default is users.xml in the security/usergroup/<name_of_usergroupservice> directory.

Enable schema validation

If selected, forces schema validation to occur every time the XML file is read. This option is useful when editing the XML file by hand.

File reload interval

Defines the frequency (in milliseconds) in which GeoServer will check for changes to the XML file. If the file is found to have been modified, GeoServer will recreate the user/group database based on the current state of the file. This value is meant to be set in cases where the XML file contents might change “out of process” and not directly through the web admin interface. The value is specified in milliseconds. A value of 0 disables any checking of the file.

Add new JDBC user/group service

To add a new JDBC user/group service, click the Add new link, and then the JDBC option at the top of the following form. The following figure shows the configuration options for a JDBC user/group service.

../../_images/ugr_ugjdbcsettings.png

Adding a user/group service via JDBC

Option

Description

Name

Name of the JDBC user/group service in GeoServer

Password encryption

The method to used to encrypt user passwords

Password policy

The policy to use to enforce constraints on user passwords

JNDI

When unchecked, specifies a direct connection to the database. When checked, specifies an existing connection located through JNDI.

Driver class name

JDBC driver to use for the database connection

Connection URL

Specifies the JDBC URL to use when creating the database connection

Username

Username to use when connecting to the database

Password

Password to use when connecting to the database

Create database tables

Specifies whether to create all the necessary tables in the underlying database

Data Definition Language (DDL) file

Specifies a custom DDL file to use for creating tables in the underlying database, for cases where the default DDL statements fail on the given database. If left blank, internal defaults are used.

Data Manipulation Language (DML) file

Specifies a custom DML file to use for accessing tables in the underlying database, for cases where the default DML statements fail on the given database. If left blank, internal defaults are used.

In addition to the parameters listed above, the following additional parameter will apply when the JNDI flag is set.

../../_images/ugr_ugjdbcjndisettings.png

Adding a user/group service via JDBC with JNDI

Option

Description

JNDI resource name

JNDI name used to locate the database connection.

Add new LDAP user/group service

To add a new LDAP user/group service, click the Add new link, and then the LDAP option at the top of the following form. The following figure shows the configuration options for a LDAP user/group service.

../../_images/ldap_group_service.png

Adding a user/group service via LDAP

Option

Description

Name

Name of the LDAP role service in GeoServer

Password encryption

The method to used to encrypt user passwords

Password policy

The policy to use to enforce constraints on user passwords

Server URL

URL for the LDAP server connection. It must include the protocol, host, and port, as well as the “distinguished name” (DN) for the root of the LDAP tree.

TLS

Enables a STARTTLS connection. (See the section on Secure LDAP connections.)

Group search base

Relative name of the node in the tree to use as the base for LDAP groups. Example: ou=groups. The root DN specified as port of the Server URL is automatically appended.

Filter to search all groups

Sets the LDAP filter for search all groups available. Leave blank to derive from attribute.

Filter to search group by name

Sets the LDAP filter for search a group by its name. Leave blank to derive from attribute.

Attribute which contains the name of the group

Sets attribute containing the group name. Leave blank to derive from name filter.

Query format to retrieve the user/group mapping

Query format used for mapping user/group memberships. Leave blank to derive from attribute. This may contain some placeholder values:

{0}, the username of the user, for example bob.

{1}, the full DN of the user, for example uid=bob,ou=users.

Attribute name to retrieve the user/group mapping

Attribute name used for mapping user/group memberships. Leave blank to derive from filter.

User search base

LDAP search base for users.

Filter to search all users

Sets the filter for search all available users. Leave blank to derive from attribute.

Filter to search user by name

Sets the filter format for search a user by its name. Leave blank to derive from attribute.

Attribute which contains the name of the user

Sets the attribute containing the name for users. Leave blank to derive from name filter.

List of attributes to populate

Sets a comma separated list of attributes to populate on users.

Authenticated onto the LDAP before querying

When checked all LDAP searches will be done in authenticated mode, using the credentials given with the Username and Password options

Username

Username to use when connecting to the LDAP server. Only applicable when the Authenticated onto the LDAP before querying parameter is checked.

Password

Password to use when connecting to the LDAP server. Only applicable when the Authenticated onto the LDAP before querying parameter is checked.

Enable Hierarchical groups search

When checked all LDAP group searches will use hierarchical mode, retrieving LDAP parent groups too.

Max depth for hierarchical groups search

Max depth number for hierarchical LDAP groups search, use -1 for infinite depth. Only applicable when the Enable Hierarchical groups search parameter is checked.

Nested group search filter

LDAP search pattern for searching parent groups. Only applicable when the Enable Hierarchical groups search parameter is checked.

Edit user/group service

Once the new user/group service is added (either XML or JDBC), clicking on it in the list of user/group services will allow additional options to be specified, such as the users and groups associated with the service.

There are three tabs in the resulting menu: Settings, Users, and Groups. The Settings tab is identical to that found when creating the user/group service, while the others are described below.

The Users tab provides options to configure users in the user/group service.

../../_images/ugr_ugusers.png

Users tab

Clicking a username will allow its parameters to be changed, while clicking the Add new link will create a new user.

Add user

../../_images/ugr_newuser.png

Creating or editing a user

Option

Description

User name

The name of the user

Enabled

When selected, will enable the user to authenticate

Password

The password for this user. Existing passwords will be obscured when viewed.

Confirm password

To set or change the password enter the password twice.

User properties

Key/value pairs associated with the user. Used for associating additional information with the user.

Group list

Full list of groups, including list of groups to which the user is a member. Membership can be toggled here via the arrow buttons.

Add a new group

Shortcut to adding a new group. Also available in the Groups tab.

Role list

Full list of roles, including a list of roles to which the user is associated. Association can be toggled here via the arrow buttons.

Add a new role

Shortcut to adding a new role

List of current roles for the user

List of current roles associated with the user. Click a role to enable editing.

The Groups tab provides configuration options for groups in this user/group service. There are options to add and remove a group, with an additional option to remove a group and the roles associated with that group.

../../_images/ugr_uggroups.png

Groups tab

Remove User

There are two related buttons that are responsible for removing users: Remove Selected, and Remove Selected and remove role associations.

  • Remove Selected removes user from users.xml and leave untouched roles.xml.

  • Remove Selected and remove role associations removes user from users.xml and also removes user and associated role to user from roles.xml.

../../_images/ugr_ugusers.png

Users tab

Add group

../../_images/ugr_newgroup.png

Creating or editing a group

Option

Description

Group name

The name of the group

Enabled

When selected the group will be active

Role list

Full list of roles, including a list of roles to which the group is associated. Association can be toggled here via the arrow buttons.

Add a new role

Shortcut to adding a new role

In this menu, user/group services can be added, removed, or edited. By default, there is one user/group service in GeoServer, which is XML-based. It is encrypted with Weak PBE and uses the default password policy. It is also possible to have a user/group service based on JDBC with or without JNDI.

Role services

In this menu, role services can be added, removed, or edited. By default, the active role service in GeoServer is XML-based, but it is also possible to have a role service based on JDBC, with or without JNDI.

The Administrator role is called ROLE_ADMINISTRATOR.

../../_images/ugr_roleservices.png

Role services

Clicking an existing role service will open it for editing, while clicking the Add new link will configure a new role service.

There are two pages for configuration: Settings and Roles.

Note

When creating a new role service, the form filled out initially can be found under the Settings tab.

Add new XML role service

To add a new XML role service, click the Add new link. XML is the default option. The following figure shows the configuration options for an XML role service.

../../_images/ugr_rolexmlsettings.png

Adding an XML role service

Option

Description

Name

The name of the role service

Administrator role

The name of the role that performs the administrator functions

XML filename

Name of the file that will contain the role information. Default is roles.xml in the security/role/<name_of_roleservice> directory.

File reload interval

Defines the frequency (in milliseconds) in which GeoServer will check for changes to the XML file. If the file is found to have been modified, GeoServer will recreate the user/group database based on the current state of the file. This value is meant to be set in cases where the XML file contents might change “out of process” and not directly through the web admin interface. The value is specified in milliseconds. A value of 0 disables any checking of the file.

Add new JDBC role service

To add a new XML role service, click the Add new link, and then the JDBC option at the top of the following form. The following figure shows the configuration options for a JDBC role service.

../../_images/ugr_rolejdbcsettings.png

Adding a role service via JDBC

Option

Description

Name

Name of the JDBC role service in GeoServer

Administrator role

The name of the role that performs the administrator function

JNDI

When unchecked, specifies a direct connection to the database. When checked, specifies an existing connection located through JNDI.

Driver class name

JDBC driver to use for the database connection

Connection URL

Specifies the JDBC URL to use when creating the database connection

Username

Username to use when connecting to the database

Password

Password to use when connecting to the database

Create database tables

Specifies whether to create all the necessary tables in the underlying database

Data Definition Language (DDL) file

Specifies a custom DDL file to use for creating tables in the underlying database, for cases where the default DDL statements fail on the given database. If left blank, internal defaults are used.

Data Manipulation Language (DML) file

Specifies a custom DML file to use for accessing tables in the underlying database, for cases where the default DML statements fail on the given database. If left blank, internal defaults are used.

In addition to the parameters listed above, the following additional parameter will apply when the JNDI flag is set.

../../_images/ugr_rolejdbcjndisettings.png

Adding a role service via JDBC with JNDI

Option

Description

JNDI resource name

JNDI name used to locate the database connection.

Add new LDAP role service

To add a new LDAP role service, click the Add new link, and then the LDAP option at the top of the following form. The following figure shows the configuration options for a LDAP role service.

../../_images/ldap_role_empty.png

Adding a role service via LDAP

Option

Description

Name

Name of the LDAP role service in GeoServer

Administrator role

The name of the role that performs the administrator function

Group administrator role

The name of the role that performs the group administrator function

Server URL

URL for the LDAP server connection. It must include the protocol, host, and port, as well as the “distinguished name” (DN) for the root of the LDAP tree.

TLS

Enables a STARTTLS connection. (See the section on Secure LDAP connections.)

Group search base

Relative name of the node in the tree to use as the base for LDAP groups. Example: ou=groups. The root DN specified as port of the Server URL is automatically appended.

Group user membership search filter

Search pattern for extracting users of a LDAP group a user belongs to. This may contain some placeholder values: {0}, the username of the user, for example bob. {1}, the full DN of the user, for example uid=bob,ou=users. To use this placeholder, the Filter used to lookup user needs to be defined, so that the dn of a user can be extracted from its username.

All groups search filter

Search pattern for locating the LDAP groups to be mapped to GeoServer roles inside the Group search base root node

Filter used to lookup user.

optional filter used to extract a user dn, to be used together with Group user membership search filter when the {1} placeholder is specified. This may contain a placeholder value: {0}, the username of the user, for example bob.

Role prefix

Prefix appended in front of role names extracted from the LDAP. If left blank, no prefix will be inserted.

Convert Role To Upper Case

If selected all role names extracted from the LDAP will be converted to upper case.

Authenticate to extract roles

When checked all LDAP searches will be done in authenticated mode, using the credentials given with the Username and Password options

Username

Username to use when connecting to the LDAP server. Only applicable when the Authenticate to extract roles parameter is checked.

Password

Password to use when connecting to the LDAP server. Only applicable when the Authenticate to extract roles parameter is checked.

Enable Hierarchical groups search

When checked all LDAP group searches will use hierarchical mode, retrieving LDAP parent groups too.

Max depth for hierarchical groups search

Max depth number for hierarchical LDAP groups search, use -1 for infinite depth. Only applicable when the Enable Hierarchical groups search parameter is checked.

Nested group search filter

LDAP search pattern for searching parent groups. Only applicable when the Enable Hierarchical groups search parameter is checked.

Edit role service

Once the new role service is added (either XML or JDBC), clicking it in the list of role services will allow the additional options to be specified, such as the roles associated with the service.

There are two tabs in the resulting menu: Settings and Roles. The Settings tab is identical to that found when creating the role service, while the Roles tab is described below.

../../_images/ugr_roleroles.png

Roles tab

Clicking a role will allow its parameters to be changed, while clicking the Add new link will create a new role.

Add role

../../_images/ugr_newrole.png

Creating or editing a role

Option

Description

Role name

The name of role. Convention is uppercase, but is not required.

Parent roles

The role that this role inherits. See the section on Roles for more information on inheritance.

Role parameters

Key/value pairs associated with the role. Used for associating additional information with the role.

Previous: Passwords
Next: Data